Overview
The Caterpillar 248 is a skid steer loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 76.5 hp, operating weight of 7,338 lb, capacity of 0.6 yd³, travel speed of 7.6 mph, fuel capacity of 23.8 gal and hydraulic capacity of 14.1 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Caterpillar 248 against similar skid steer loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
7,338
lb
Net Power
76.50
hp
Gross Power
80
hp
Bucket Capacity
0.60
yd3
Full Specifications
56 specs
Dimensions
Bucket Pin Height - Carry Position
120 in / 3,048 mm
Bucket Pin Height - Maximum Lift
10.17 ft / 3.10 m
Bumper Overhang - Rear Axle
41 lb / 19 kg
Clearance At Max Lift And Dump
7.87 ft / 2.40 m
Clearance At Maximum Lift And Dump
94 ft / 28.65 m
Ground Clearance
9 ft / 2.74 m
Height - Top Of Cab
6.75 ft / 2.06 m
Height to Top of Cab
6.87 ft / 2.09 m
Length - With Bucket On Ground
138 in / 3,505 mm
Length - Without Bucket
110 in / 2,794 mm
Length W/O Bucket
9.19 ft / 2.80 m
Length With Bucket
11.54 ft / 3.52 m
Maximum Overall Height
156 in / 3,962 mm
Reach - Maximum Lift/Dump
21.30 ft / 6.49 m
Reach At Max Lift And Dump
23.39 ft / 7.13 m
Turning Radius From Center - Inc Bucket
86.50 ft / 26.37 m
Vehicle Width Over Tires
66 in / 1,676 mm
Wheel Base
3.73 in / 95 mm
Wheelbase
3.73 ft / 1.14 m
Width Over Tires
6.01 ft / 1.83 m
Engine
Bore
3.90 in / 99 mm
Bucket Capacity
0.60 yd³ / 0.46 m³
Displacement
183 cu in / 3.0 L
Engine Make
2236
Engine Model
3034T
Fuel Capacity
23.80 gal / 90.1 L
Fuel Tank
23.80 gal / 90.1 L
Gross Power
80 hp / 59.7 kW
Hydraulic System Fluid Capacity
14.10 gal / 53.4 L
Hydraulic Tank
9.20 gal / 34.8 L
Max Speed
7.60 mph / 12.2 km/h
Net Flywheel Power
55 hp / 41.0 kW
Net Power
74 hp / 55.2 kW
Number of Cylinders
4
Operating Load Rating
2,000 lb / 907 kg
Operating Speed
7.60 mph / 12.2 km/h
Operating Weight
7,338 lb / 3,328 kg
Operational Weight
7,530 lb / 3,416 kg
Power Measured @
2,600 rpm
Stroke
4 in / 102 mm
Tipping Angle
3,810 deg
Hydraulics
Chain Box - Each Side
2
Fops
SAEJ/ISO 3449 APR98 Level I and ISO3449:1992 Level I
Fops Level Ii
SAEJ/ISO 3449 APR 98 Level II and ISO 3449:1992 Level II (optional)
Loader Hydraulic Flow
33 gal/min / 124.9 L/min
Loader Hydraulic Pressure
4,200 psi / 289.6 bar
Net Power
77 hp / 57.0 kW
Pump Flow Capacity
33.10 gal/min / 125.3 L/min
Rops
SAE J1040 MAY94 and ISO3471:1994
Other
Breakout Force - Lift Cylinder
4,308 lb / 1,954 kg
Breakout Force - Tilt Cylinder
5,261 lb / 2,386 kg
Rated Operating Capacity
2,000 lb / 907 kg
Rated Operating Capacity With Optional Counterweight
2,100 lb / 953 kg
Tipping Load
4,000 lb / 1,814 kg
Cooling System
2.60 gal / 9.8 L
Engine Crankcase
1.80 gal / 6.8 L
Frequently Asked Questions
What is the operating weight of the Caterpillar 248? +
The Caterpillar 248 has an operating weight of 7,338 lb (3,328 kg). This places it in a class suited for skid steer loader applications where ground pressure and transport weight are key considerations.
How powerful is the Caterpillar 248 engine? +
The Caterpillar 248 produces 80 hp (59.7 kW) of engine power. This output is typical for its weight class and designed to handle demanding Skid Steer Loader work cycles efficiently.
How does the Caterpillar 248 compare to similar Skid Steer Loader models? +
You can compare the Caterpillar 248 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.