Overview
The Caterpillar 248B is a skid steer loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 74 hp, operating weight of 7,321 lb, travel speed of 7.8 mph, fuel capacity of 23.8 gal and hydraulic capacity of 13.8 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Caterpillar 248B against similar skid steer loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
7,321
lb
Net Power
74
hp
Gross Power
82
hp
Full Specifications
76 specs
Dimensions
Breakout Force
5,483 lb / 2,487 kg
Bucket Pin Height - Carry Position
10 ft / 3.05 m
Bucket Pin Height - Maximum Lift
10.17 ft / 3.10 m
Bumper Overhang - Rear Axle
41 lb / 19 kg
Clearance At Max Lift And Dump
7.87 ft / 2.40 m
Clearance At Maximum Lift And Dump
94 ft / 28.65 m
Ground Clearance
9 ft / 2.74 m
Height - Top Of Cab
6.84 ft / 2.08 m
Height to Top of Cab
6.87 ft / 2.09 m
Length - With Bucket On Ground
138 in / 3,505 mm
Length - Without Bucket
110 in / 2,794 mm
Length W/O Bucket
9.19 ft / 2.80 m
Length With Bucket
11.54 ft / 3.52 m
Maximum Overall Height
156 in / 3,962 mm
Maximum Reach - With Arms Parallel
53 ft / 16.15 m
Reach - Maximum Lift/Dump
21 ft / 6.40 m
Reach At Max Lift And Dump
21.30 ft / 6.49 m
Turn Radius From Center - Bucket
83 ft / 25.30 m
Turn Radius From Center - Coupler
52 ft / 15.85 m
Turn Radius From Center - Rear
64 ft / 19.51 m
Turning Radius From Center - Inc Bucket
82.56 ft / 25.16 m
Turning Radius From Center - Machine Rear
63.90 ft / 19.48 m
Vehicle Width Over Tires
66 in / 1,676 mm
Wheel Base
3.75 in / 95 mm
Wheelbase
3.73 ft / 1.14 m
Width Over Tires
5.50 ft / 1.68 m
Engine
Alternator Supplied Amperage
90 A
Bore
3.70 in / 94 mm
Cat 3044C DIT
Engine Power - Iso 14396
Chain Box Fluid Capacity - Each Side
1.90 gal / 7.2 L
Cooling System Fluid Capacity
2.70 gal / 10.2 L
Engine Make
2236
Engine Model
3044C DIT
Engine Oil Fluid Capacity
2.70 gal / 10.2 L
Engine Power - Iso 14396
80 hp / 59.7 kW
Fuel Capacity
23.80 gal / 90.1 L
Fuel Tank
23.80 gal / 90.1 L
Gross Power
82 hp / 61.1 kW
Gross Power - Sae J1995
82 hp / 61.1 kW
Hydraulic System Fluid Capacity
13.80 gal / 52.2 L
Hydraulic Tank
9.20 gal / 34.8 L
Max Speed
7.80 mph / 12.6 km/h
Net Flywheel Power
76 hp / 56.7 kW
Net Power
77 hp / 57.0 kW
Net Power - Eec 80/1269
77 hp / 57.4 kW
Net Power - Iso 9249 Eec
77 hp / 57.4 kW
Net Power - Sae 1349
76 hp / 56.7 kW
Operating Load Rating
2,000 lb / 907 kg
Operating Voltage
12 V
Operating Weight
7,321 lb / 3,321 kg
Operational Weight
7,319 lb / 3,320 kg
Relief Valve Pressure
4,061 psi / 280.0 bar
Stroke
4.70 in / 119 mm
Tipping Angle
3,999.20 deg
Travel Speed Forward
7.70 mph / 12.4 km/h
Travel Speed Forward - 2-Speed Option
11.80 mph / 19.0 km/h
Travel Speed Reverse
7.70 mph / 12.4 km/h
Travel Speed Reverse - 2-Speed Option
11.80 mph / 19.0 km/h
Hydraulics
Chain Box - Each Side
1.80
Fops
SAE J/ISO 3449 APR98 Level I and ISO3449:1992 Level I
Fops Level Ii
SAE J/ISO 3449 APR98 Level II and ISO 3449:1992 Level II (optional)
Hydraulic Power
78 hp / 58.3 kW
Loader Hydraulic Flow
33.02 gal/min / 125.0 L/min
Loader Hydraulic Pressure
4,061 psi / 280.0 bar
Maximum Loader Hydraulic Flow
33 gal/min / 124.9 L/min
Maximum Loader Hydraulic Pressure
4,060 psi / 279.9 bar
Net Power
74 hp / 55.2 kW
Pump Flow Capacity
33.10 gal/min / 125.3 L/min
Rops
SAE J1040 MAY94 and ISO3471:1994
Other
Breakout Force - Lift Cylinder
4,592 lb / 2,083 kg
Breakout Force - Tilt Cylinder
5,484 lb / 2,488 kg
Rated Operating Capacity
2,000 lb / 907 kg
Rated Operating Capacity With Optional Counterweight
2,100 lb / 953 kg
Tipping Load
4,188 lb / 1,900 kg
Cooling System
2.60 gal / 9.8 L
Engine Crankcase
2.60 gal / 9.8 L
Frequently Asked Questions
What is the operating weight of the Caterpillar 248B? +
The Caterpillar 248B has an operating weight of 7,321 lb (3,321 kg). This places it in a class suited for skid steer loader applications where ground pressure and transport weight are key considerations.
How powerful is the Caterpillar 248B engine? +
The Caterpillar 248B produces 82 hp (61.1 kW) of engine power. This output is typical for its weight class and designed to handle demanding Skid Steer Loader work cycles efficiently.
How does the Caterpillar 248B compare to similar Skid Steer Loader models? +
You can compare the Caterpillar 248B side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.