Overview
The Caterpillar 262 is a skid steer loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 59 hp, operating weight of 7,655 lb, capacity of 0.6 yd³, travel speed of 7.6 mph, fuel capacity of 23.8 gal and hydraulic capacity of 14.1 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Caterpillar 262 against similar skid steer loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
7,655
lb
Net Power
59
hp
Gross Power
80
hp
Bucket Capacity
0.60
yd3
Full Specifications
56 specs
Dimensions
Bucket Pin Height - Carry Position
9.60 ft / 2.93 m
Bucket Pin Height - Maximum Lift
10.65 ft / 3.25 m
Bumper Overhang - Rear Axle
41 lb / 19 kg
Clearance At Max Lift And Dump
7.99 ft / 2.44 m
Clearance At Maximum Lift And Dump
98.20 ft / 29.93 m
Ground Clearance
9 ft / 2.74 m
Height - Top Of Cab
6.89 ft / 2.10 m
Height to Top of Cab
6.83 ft / 2.08 m
Length - With Bucket On Ground
142.40 in / 3,617 mm
Length - Without Bucket
114.30 in / 2,903 mm
Length W/O Bucket
9.55 ft / 2.91 m
Length With Bucket
11.87 ft / 3.62 m
Maximum Overall Height
161 in / 4,089 mm
Reach - Maximum Lift/Dump
32.50 ft / 9.91 m
Reach At Max Lift And Dump
30.71 ft / 9.36 m
Turning Radius From Center - Inc Bucket
89.14 ft / 27.17 m
Vehicle Width Over Tires
72 in / 1,829 mm
Wheel Base
4.03 in / 102 mm
Wheelbase
4.03 ft / 1.23 m
Width Over Tires
6.01 ft / 1.83 m
Engine
Bore
3.90 in / 99 mm
Bucket Capacity
0.60 yd³ / 0.46 m³
Displacement
183 cu in / 3.0 L
Engine Make
2236
Engine Model
3034T
Fuel Capacity
23.80 gal / 90.1 L
Fuel Tank
23.80 gal / 90.1 L
Gross Power
80 hp / 59.7 kW
Hydraulic System Fluid Capacity
14.10 gal / 53.4 L
Hydraulic Tank
9.20 gal / 34.8 L
Max Speed
7.60 mph / 12.2 km/h
Net Flywheel Power
74 hp / 55.2 kW
Net Power
74 hp / 55.2 kW
Number of Cylinders
4
Operating Load Rating
2,500 lb / 1,134 kg
Operating Speed
7.60 mph / 12.2 km/h
Operating Weight
7,655 lb / 3,472 kg
Operational Weight
3,552 lb / 1,611 kg
Power Measured @
2,600 rpm
Stroke
4 in / 102 mm
Tipping Angle
4,779.60 deg
Hydraulics
Chain Box - Each Side
2.10
Fops
SAEJ/ISO 3449 APR98 Level I and ISO3449:1992 Level I
Fops Level Ii
SAEJ/ISO 3449 APR 98 Level II and ISO 3449:1992 Level II (optional)
Loader Hydraulic Flow
22 gal/min / 83.3 L/min
Loader Hydraulic Pressure
3,300 psi / 227.5 bar
Net Power
59 hp / 44.0 kW
Pump Flow Capacity
22 gal/min / 83.3 L/min
Rops
SAE J1040 MAY94 and ISO3471:1994
Other
Breakout Force - Lift Cylinder
5,020 lb / 2,277 kg
Breakout Force - Tilt Cylinder
5,212 lb / 2,364 kg
Rated Operating Capacity
2,500 lb / 1,134 kg
Rated Operating Capacity With Optional Counterweight
2,550 lb / 1,157 kg
Tipping Load
5,000 lb / 2,268 kg
Cooling System
2.60 gal / 9.8 L
Engine Crankcase
1.80 gal / 6.8 L
Frequently Asked Questions
What is the operating weight of the Caterpillar 262? +
The Caterpillar 262 has an operating weight of 7,655 lb (3,472 kg). This places it in a class suited for skid steer loader applications where ground pressure and transport weight are key considerations.
How powerful is the Caterpillar 262 engine? +
The Caterpillar 262 produces 80 hp (59.7 kW) of engine power. This output is typical for its weight class and designed to handle demanding Skid Steer Loader work cycles efficiently.
How does the Caterpillar 262 compare to similar Skid Steer Loader models? +
You can compare the Caterpillar 262 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.