Overview
The Gehl 5640 is a skid steer loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 60 hp, travel speed of 8.4 mph, fuel capacity of 19.1 gal and hydraulic capacity of 15.9 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Gehl 5640 against similar skid steer loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Net Power
60
hp
Full Specifications
24 specs
Dimensions
Clearance At Max Lift And Dump
7.80 ft / 2.38 m
Ground Clearance
8 ft / 2.44 m
Height to Top of Cab
6.75 ft / 2.06 m
Length W/O Bucket
7.96 ft / 2.43 m
Length With Bucket
10.92 ft / 3.33 m
Reach At Max Lift And Dump
32.80 ft / 10.00 m
Turning Radius From Center - Inc Bucket
41.01 ft / 12.50 m
Turning Radius From Center - Machine Rear
33.06 ft / 10.08 m
Wheelbase
3.55 ft / 1.08 m
Width Over Tires
5.59 ft / 1.70 m
Engine
Alternator Supplied Amperage
95 A
Displacement
190 cu in / 3.1 L
Engine Make
2349
Engine Model
F4M2011
Fuel Capacity
19.10 gal / 72.3 L
Hydraulic System Fluid Capacity
15.90 gal / 60.2 L
Max Speed
8.40 mph / 13.5 km/h
Net Power
60 hp / 44.7 kW
Operating Load Rating
2,000 lb / 907 kg
Operating Voltage
12 V
Operational Weight
7,380 lb / 3,348 kg
Power Measured @
2,500 rpm
Tipping Angle
4,000 deg
Hydraulics
Pump Flow Capacity
23 gal/min / 87.1 L/min
Frequently Asked Questions
How powerful is the Gehl 5640 engine? +
The Gehl 5640 produces 60 hp (44.7 kW) of engine power. This output is typical for its weight class and designed to handle demanding Skid Steer Loader work cycles efficiently.
How does the Gehl 5640 compare to similar Skid Steer Loader models? +
You can compare the Gehl 5640 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.