Overview
The Hyundai HSL215T is a skid steer loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 25 hp, travel speed of 3.0 mph, fuel capacity of 2.2 gal and hydraulic capacity of 11.6 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Hyundai HSL215T against similar skid steer loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Gross Power
25
hp
Full Specifications
23 specs
Dimensions
Clearance At Max Lift And Dump
3.46 ft / 1.05 m
Ground Clearance
4.38 ft / 1.34 m
Height to Top of Cab
4.13 ft / 1.26 m
Length W/O Bucket
5.05 ft / 1.54 m
Length With Bucket
6.61 ft / 2.01 m
Reach At Max Lift And Dump
20.24 ft / 6.17 m
Turning Radius From Center - Inc Bucket
47.37 ft / 14.44 m
Turning Radius From Center - Machine Rear
36.26 ft / 11.05 m
Wheelbase
2.28 ft / 0.69 m
Width Over Tires
3.31 ft / 1.01 m
Engine
Engine Make
2355
Engine Model
CH25
Fuel Capacity
2.20 gal / 8.3 L
Gross Power
25 hp / 18.6 kW
Hydraulic System Fluid Capacity
11.60 gal / 43.9 L
Max Speed
3 mph / 4.8 km/h
Operating Load Rating
475 lb / 215 kg
Operational Weight
1,750 lb / 794 kg
Power Measured @
3,600 rpm
Relief Valve Pressure
3,000 psi / 206.8 bar
Tipping Angle
950.20 deg
Tire Size
18 in / 457 mm
Hydraulics
Pump Flow Capacity
8.60 gal/min / 32.6 L/min
Frequently Asked Questions
How powerful is the Hyundai HSL215T engine? +
The Hyundai HSL215T produces 25 hp (18.6 kW) of engine power. This output is typical for its weight class and designed to handle demanding Skid Steer Loader work cycles efficiently.
How does the Hyundai HSL215T compare to similar Skid Steer Loader models? +
You can compare the Hyundai HSL215T side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.