Overview
The Hyundai HSL275T is a skid steer loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 25 hp, travel speed of 4.5 mph, fuel capacity of 8.2 gal and hydraulic capacity of 11.1 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Hyundai HSL275T against similar skid steer loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Gross Power
25
hp
Full Specifications
22 specs
Dimensions
Clearance At Max Lift And Dump
3.84 ft / 1.17 m
Ground Clearance
5.99 ft / 1.83 m
Height to Top of Cab
4.28 ft / 1.30 m
Length W/O Bucket
5.28 ft / 1.61 m
Length With Bucket
6.65 ft / 2.03 m
Reach At Max Lift And Dump
10 ft / 3.05 m
Turning Radius From Center - Inc Bucket
50.28 ft / 15.33 m
Turning Radius From Center - Machine Rear
38.39 ft / 11.70 m
Wheelbase
2.52 ft / 0.77 m
Width Over Tires
3.51 ft / 1.07 m
Engine
Engine Make
2334
Engine Model
D1105
Fuel Capacity
8.20 gal / 31.0 L
Gross Power
25 hp / 18.6 kW
Hydraulic System Fluid Capacity
11.10 gal / 42.0 L
Max Speed
4.50 mph / 7.2 km/h
Operating Load Rating
420 lb / 191 kg
Operational Weight
2,350 lb / 1,066 kg
Power Measured @
3,000 rpm
Relief Valve Pressure
3,000 psi / 206.8 bar
Tipping Angle
1,199.40 deg
Hydraulics
Pump Flow Capacity
8.60 gal/min / 32.6 L/min
Frequently Asked Questions
How powerful is the Hyundai HSL275T engine? +
The Hyundai HSL275T produces 25 hp (18.6 kW) of engine power. This output is typical for its weight class and designed to handle demanding Skid Steer Loader work cycles efficiently.
How does the Hyundai HSL275T compare to similar Skid Steer Loader models? +
You can compare the Hyundai HSL275T side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.