Overview
The JCB 155 is a skid steer loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 56 hp, capacity of 0.5 yd³, travel speed of 7.5 mph, fuel capacity of 24.4 gal and hydraulic capacity of 18.50 gal/min. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the JCB 155 against similar skid steer loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Gross Power
56
hp
Bucket Capacity
0.50
yd3
Overall Length
137.41
in
Full Specifications
40 specs
Dimensions
Angle Of Departure
27 deg
Breakout Force
4,013 lb / 1,820 kg
Bucket Corner Turning Radius
6.86 ft / 2.09 m
Bucket Width
66.20 in / 1,681 mm
Dig Depth
393.71 ft / 120.00 m
Dump Angle
42 deg
Dump Height
7.42 ft / 2.26 m
Ground Clearance
8.27 ft / 2.52 m
Loadover Height
9,317.59 in / 236,667 mm
Max. Reach @ Full Height
3.25 ft / 0.99 m
Overall Height
6.50 ft / 1.98 m
Overall Length
137.41 in / 3,490 mm
Pin Height
9.91 ft / 3.02 m
Quick Hitch Turning Radius
3.75 ft / 1.14 m
Reach @ Ground Level
3.55 ft / 1.08 m
Rear Chassis Turning Radius
5.42 ft / 1.65 m
Rollback - Ground Level
30
Wheelbase
3.52 ft / 1.07 m
Width Over Tyres
59.85 in / 1,520 mm
Engine
Alternator
100 A
Battery
12 V
Bucket Capacity
0.50 yd³ / 0.38 m³
Displacement
1,860 cu in / 30.5 L
Emissions Certification
EPA-T4F (EU St3B)
Engine Coolant
2.70 gal / 10.2 L
Engine Model
Kohler KDI 1903TCR/26B
Fuel Tank
24.40 gal / 92.4 L
Gross Power
56 hp / 41.8 kW
Max Torque
166 lb-ft / 225 Nm
Operational Weight
6,515 lb / 2,955 kg
Power Measured @
2,400 rpm
Relief Valve Pressure
3,335 psi / 229.9 bar
Standard
10 x 16.5 - 8 PR Xtra Wall Off Road
Starter Motor
2.0 kW / 3 hp
Torque Measured @
1,200 rpm
Travel Speed
7.50 mph / 12.1 km/h
Hydraulics
Engine Oil
2 gal / 7.6 L
Loader Lift Capacity With Bucket
3,902 lb / 1,770 kg
Pump Flow Capacity
18.50 gal/min / 70.0 L/min
Tipping Load - No Counterweight
3,100 lb / 1,406 kg
Frequently Asked Questions
How powerful is the JCB 155 engine? +
The JCB 155 produces 56 hp (41.8 kW) of engine power. This output is typical for its weight class and designed to handle demanding Skid Steer Loader work cycles efficiently.
What is the travel speed of the JCB 155? +
The JCB 155 has a maximum travel speed of 7.5 mph (12.1 km/h), enabling efficient movement between work areas on the job site.
How does the JCB 155 compare to similar Skid Steer Loader models? +
You can compare the JCB 155 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.