Overview
The JCB 215 is a skid steer loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 74 hp, capacity of 0.5 yd³, travel speed of 7.5 mph, fuel capacity of 24.4 gal and hydraulic capacity of 18.50 gal/min. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the JCB 215 against similar skid steer loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Gross Power
73.80
hp
Bucket Capacity
0.50
yd3
Overall Length
137.41
in
Full Specifications
45 specs
Dimensions
Angle Of Departure
25 deg
Breakout Force
4,899 lb / 2,222 kg
Bucket Corner Turning Radius
6.86 ft / 2.09 m
Bucket Width
66.20 in / 1,681 mm
Dig Depth
393.71 ft / 120.00 m
Dump Angle
42 deg
Dump Height
7.42 ft / 2.26 m
Ground Clearance
8.27 ft / 2.52 m
Loadover Height
9,317.59 in / 236,667 mm
Max. Reach @ Full Height
3.97 ft / 1.21 m
Overall Height
6.50 ft / 1.98 m
Overall Length
137.41 in / 3,490 mm
Pin Height
9.85 ft / 3.00 m
Quick Hitch Turning Radius
3.75 ft / 1.14 m
Reach @ Ground Level
3.55 ft / 1.08 m
Rear Chassis Turning Radius
5.42 ft / 1.65 m
Rollback - Ground Level
30
Wheelbase
3.52 ft / 1.07 m
Width Over Tyres
59.85 in / 1,520 mm
Engine
Alternator
100 A
Battery
12 V
Bucket Capacity
0.50 yd³ / 0.38 m³
Displacement
2,482 cu in / 40.7 L
Emissions Certification
EPA-T4F (EU St3B)
Engine Coolant
2.70 gal / 10.2 L
Engine Model
Kohler - KDI2504TCR/26A
Fuel Tank
24.40 gal / 92.4 L
Gross Power
74 hp / 55.0 kW
Max Torque
221 lb-ft / 300 Nm
Operational
Sae Cab Operating Weight 1
Operational Weight
7,253 lb / 3,290 kg
Power Measured @
2,400 rpm
Relief Valve Pressure
484 psi / 33.4 bar
Standard
10 x 16.5 - 8 PR Xtra Wall Off Road
Starter Motor
2.0 kW / 3 hp
Torque Measured @
1,200 rpm
Travel Speed
7.50 mph / 12.1 km/h
Hydraulics
Engine Oil
2 gal / 7.6 L
Loader Lift Capacity With Bucket
4,592 lb / 2,083 kg
Pump Flow Capacity
18.50 gal/min / 70.0 L/min
Roc With Full Counterweight
2,258 lb / 1,024 kg
Sae Cab Operating Weight 1
7,341 lb / 3,330 kg
Sae Cab Operating Weight 2
7,474 lb / 3,390 kg
Tipping Load - Full Counterweight
4,517 lb / 2,049 kg
Tipping Load - No Counterweight
4,222 lb / 1,915 kg
Frequently Asked Questions
How powerful is the JCB 215 engine? +
The JCB 215 produces 74 hp (55.0 kW) of engine power. This output is typical for its weight class and designed to handle demanding Skid Steer Loader work cycles efficiently.
What is the travel speed of the JCB 215? +
The JCB 215 has a maximum travel speed of 7.5 mph (12.1 km/h), enabling efficient movement between work areas on the job site.
How does the JCB 215 compare to similar Skid Steer Loader models? +
You can compare the JCB 215 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.