Overview
The JCB 300 is a skid steer loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 74 hp, capacity of 0.6 yd³, travel speed of 12.5 mph, fuel capacity of 27.3 gal and hydraulic capacity of 14.6 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the JCB 300 against similar skid steer loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Gross Power
74
hp
Bucket Capacity
0.60
yd3
Full Specifications
46 specs
Dimensions
Angle Of Departure
29 deg
Breakout Force
6,543 lb / 2,968 kg
Bucket Width
74.90 in / 1,902 mm
Clearance At Max Lift And Dump
8.08 ft / 2.46 m
Dig Depth
393.71 ft / 120.00 m
Dump Angle
42 deg
Dump Height
7.55 ft / 2.30 m
Ground Clearance
9.85 ft / 3.00 m
Height to Top of Cab
6.86 ft / 2.09 m
Length With Bucket
12.41 ft / 3.78 m
Loadover Height
9,514.44 in / 241,667 mm
Pin Height
10,498.69 in / 266,667 mm
Reach At Max Lift And Dump
35.44 ft / 10.80 m
Rollback - Ground Level
30
Turning Radius From Center - Inc Bucket
86.62 ft / 26.40 m
Turning Radius From Center - Machine Rear
69.30 ft / 21.12 m
Wheelbase
4.11 ft / 1.25 m
Width Over Tires
5.91 ft / 1.80 m
Engine
Alternator Supplied Amperage
95 A
Battery
12 V
Bucket Capacity
0.60 yd³ / 0.46 m³
Chain Box Fluid Capacity - Each Side
6.10 gal / 23.1 L
Cooling System Fluid Capacity
4.10 gal / 15.5 L
Displacement
268 cu in / 4.4 L
Emissions Certification
EPA-T4F (EU St3B)
Engine Make
2257
Engine Model
EcoMAX TCAE-55
Engine Oil Fluid Capacity
4 gal / 15.1 L
Fuel Capacity
27.30 gal / 103.3 L
Gross Power
74 hp / 55.2 kW
Hydraulic System Fluid Capacity
14.60 gal / 55.3 L
Max Speed
12.40 mph / 20.0 km/h
Max Torque
295 lb-ft / 400 Nm
Operating Load Rating
3,000 lb / 1,361 kg
Operating Speed
6.80 mph / 10.9 km/h
Operating Voltage
12 V
Operational Weight
9,288 lb / 4,213 kg
Power Measured @
2,400 rpm
Relief Valve Pressure
3,335 psi / 229.9 bar
Standard
12 x 16.5 - 10 PR Xtra Wall Off Road
Starter Motor
4.2 kW / 6 hp
Tipping Angle
6,369.20 deg
Torque Measured @
1,200 rpm
Travel Speed
12.50 mph / 20.1 km/h
Hydraulics
Loader Lift Capacity With Bucket
6,056 lb / 2,747 kg
Pump Flow Capacity
23.80 gal/min / 90.1 L/min
Frequently Asked Questions
How powerful is the JCB 300 engine? +
The JCB 300 produces 74 hp (55.2 kW) of engine power. This output is typical for its weight class and designed to handle demanding Skid Steer Loader work cycles efficiently.
What is the travel speed of the JCB 300? +
The JCB 300 has a maximum travel speed of 12.5 mph (20.1 km/h), enabling efficient movement between work areas on the job site.
How does the JCB 300 compare to similar Skid Steer Loader models? +
You can compare the JCB 300 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.