Overview
The JCB 406 Integrated Tool Carrier is a integrated tool carrier listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 56 hp, operating weight of 10,877 lb, travel speed of 12.5 mph, fuel capacity of 21.0 gal and hydraulic capacity of 18.5 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the JCB 406 Integrated Tool Carrier against similar integrated tool carrier models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
10,877
lb
Net Power
64
hp
Gross Power
59
hp
Bucket Capacity - Heaped
1
yd3
Full Specifications
42 specs
Dimensions
Breakout Force
9,420 lb / 4,273 kg
Dump Clearance At Max Lift
8.17 ft / 2.49 m
Fork Tine Length
3.94 ft / 1.20 m
Ground Clearance
1.09 ft / 0.33 m
Height to Top of Cab
8.21 ft / 2.50 m
Hinge Pin Max Height
10.28 ft / 3.13 m
Length W/ Bucket On Ground
16.85 ft / 5.14 m
Max Lift Height
9.89 ft / 3.01 m
Reach At Max Height And Dump
2.51 ft / 0.77 m
Wheelbase
6.89 ft / 2.10 m
Width Over Tires
5.78 ft / 1.76 m
Engine
Alternator Supplied Amperage
80 A
Displacement
190 cu in / 3.1 L
Engine Make
2349
Engine Model
F4L2011
Engine Oil Capacity
3.10 gal / 11.7 L
Front Diff Fluid Capacity
1 gal / 3.8 L
Fuel Capacity
21 gal / 79.5 L
Gross Power
59 hp / 44.0 kW
Hydraulic System Fluid Capacity
18.50 gal / 70.0 L
Max Speed Forward
12.50 mph / 20.1 km/h
Max Speed Reverse
12.50 mph / 20.1 km/h
Max Torque
140 lb-ft / 190 Nm
Net Power
56 hp / 41.8 kW
Number of Cylinders
4
Number of Forward Gears
2
Number of Reverse Gears
2
Operating Voltage
12 V
Operating Weight
10,877 lb / 4,934 kg
Power Measured @
2,500 rpm
Rear Axle Oscillation
10 lb / 5 kg
Rear Diff Fluid Capacity
1 gal / 3.8 L
Static Tipping Load - Bucket
9,458 lb / 4,290 kg
Torque Measured @
1,700 rpm
Turning Radius
9 ft / 2.74 m
Hydraulics
Bucket Capacity - Heaped
1 yd³ / 0.76 m³
Dump Time
3.50 sec
Lower Time
3.10 sec
Net Power
64 hp / 47.7 kW
Pump Flow Capacity
15.90 gal/min / 60.2 L/min
Raise Time
4.90 sec
Relief Valve Setting
3,335 psi / 229.9 bar
Frequently Asked Questions
What is the operating weight of the JCB 406 Integrated Tool Carrier? +
The JCB 406 Integrated Tool Carrier has an operating weight of 10,877 lb (4,934 kg). This places it in a class suited for integrated tool carrier applications where ground pressure and transport weight are key considerations.
How powerful is the JCB 406 Integrated Tool Carrier engine? +
The JCB 406 Integrated Tool Carrier produces 59 hp (44.0 kW) of engine power. This output is typical for its weight class and designed to handle demanding Integrated Tool Carrier work cycles efficiently.
How does the JCB 406 Integrated Tool Carrier compare to similar Integrated Tool Carrier models? +
You can compare the JCB 406 Integrated Tool Carrier side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.