JCB · Integrated Tool Carrier

JCB 411HT High Lift Integrated Tool Carrier Specs

/5 · ratings Be the first to rate ✓ Thanks!

JCB

Overview

The JCB 411HT High Lift Integrated Tool Carrier is a integrated tool carrier listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 93 hp, operating weight of 19,253 lb, travel speed of 23.3 mph, fuel capacity of 33.0 gal and hydraulic capacity of 29.0 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the JCB 411HT High Lift Integrated Tool Carrier against similar integrated tool carrier models by power, weight, capacity, dimensions, speed, and other technical values.

Key Specifications

Operating Weight
19,253
lb

Net Power
92.80
hp

Gross Power
100
hp

Bucket Capacity - Heaped
1.60
yd3

Full Specifications

45 specs

Dimensions

Breakout Force 16,455 lb / 7,464 kg

Bucket Capacity - Struck 1.40 yd³ / 1.07 m³

Dump Clearance At Max Lift 9.05 ft / 2.76 m

Fork Tine Length 4.01 ft / 1.22 m

Ground Clearance 1.35 ft / 0.41 m

Height to Top of Cab 10.10 ft / 3.08 m

Hinge Pin Max Height 11.88 ft / 3.62 m

Length W/ Bucket On Ground 19.99 ft / 6.09 m

Max Lift Height 11.35 ft / 3.46 m

Reach At Max Height And Dump 3.15 ft / 0.96 m

Wheelbase 8.86 ft / 2.70 m

Width Over Tires 7.23 ft / 2.20 m

Engine

Alternator Supplied Amperage 55 A

Cooling System Fluid Capacity 6.10 gal / 23.1 L

Displacement 269 cu in / 4.4 L

Engine Make 2257

Engine Oil Capacity 3 gal / 11.4 L

Front Diff Fluid Capacity 6.60 gal / 25.0 L

Fuel Capacity 33 gal / 124.9 L

Gross Power 100 hp / 74.6 kW

Hydraulic System Fluid Capacity 29 gal / 109.8 L

Max Speed Forward 23.30 mph / 37.5 km/h

Max Speed Reverse 17.10 mph / 27.5 km/h

Max Torque 313 lb-ft / 424 Nm

Net Power 93 hp / 69.2 kW

Number of Cylinders 4

Number of Forward Gears 4

Number of Reverse Gears 3

Operating Voltage 24 V

Operating Weight 19,253 lb / 8,733 kg

Power Measured @ 2,200 rpm

Rear Axle Oscillation 13 lb / 6 kg

Rear Diff Fluid Capacity 6.60 gal / 25.0 L

Static Tipping Load - Bucket 12,853 lb / 5,830 kg

Static Tipping Load - Forks 9,027 lb / 4,095 kg

Torque Measured @ 1,400 rpm

Transmission Fluid Capacity 7.10 gal / 26.9 L

Turning Radius 18 ft / 5.49 m

Hydraulics

Bucket Capacity - Heaped 1.60 yd³ / 1.22 m³

Dump Time 1.10 sec

Lower Time 3.70 sec

Net Power 93 hp / 69.2 kW

Pump Flow Capacity 103.10 gal/min / 390.3 L/min

Raise Time 5 sec

Relief Valve Setting 3,190 psi / 219.9 bar

Related Machines

Caterpillar

930G Integrated Tool Carrier

Caterpillar

IT62H Integrated Tool Carrier

Caterpillar

IT38G Integrated Tool Carrier

Caterpillar

IT38H Integrated Tool Carrier

Caterpillar

IT62G Integrated Tool Carrier

Michigan

L70

Frequently Asked Questions

What is the operating weight of the JCB 411HT High Lift Integrated Tool Carrier? +

The JCB 411HT High Lift Integrated Tool Carrier has an operating weight of 19,253 lb (8,733 kg). This places it in a class suited for integrated tool carrier applications where ground pressure and transport weight are key considerations.

How powerful is the JCB 411HT High Lift Integrated Tool Carrier engine? +

The JCB 411HT High Lift Integrated Tool Carrier produces 100 hp (74.6 kW) of engine power. This output is typical for its weight class and designed to handle demanding Integrated Tool Carrier work cycles efficiently.

How does the JCB 411HT High Lift Integrated Tool Carrier compare to similar Integrated Tool Carrier models? +

You can compare the JCB 411HT High Lift Integrated Tool Carrier side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.