Overview
The JCB 412S Integrated Tool Carrier is a integrated tool carrier listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 110 hp, operating weight of 18,038 lb, travel speed of 23.5 mph, fuel capacity of 33.1 gal and hydraulic capacity of 29.1 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the JCB 412S Integrated Tool Carrier against similar integrated tool carrier models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
18,038.30
lb
Net Power
95
hp
Gross Power
121.40
hp
Bucket Capacity - Heaped
1.40
yd3
Full Specifications
45 specs
Dimensions
Breakout Force
12,972 lb / 5,884 kg
Bucket Capacity - Struck
1.10 yd³ / 0.84 m³
Dump Clearance At Max Lift
8.86 ft / 2.70 m
Fork Tine Length
4.01 ft / 1.22 m
Ground Clearance
1.32 ft / 0.40 m
Height to Top of Cab
9.61 ft / 2.93 m
Hinge Pin Max Height
11.93 ft / 3.64 m
Length W/ Bucket On Ground
20.15 ft / 6.14 m
Max Lift Height
11.32 ft / 3.45 m
Reach At Max Height And Dump
3.49 ft / 1.06 m
Wheelbase
8.86 ft / 2.70 m
Width Over Tires
7.46 ft / 2.27 m
Engine
Alternator Supplied Amperage
55 A
Cooling System Fluid Capacity
5.70 gal / 21.6 L
Displacement
271 cu in / 4.4 L
Engine Make
2257
Engine Model
444
Engine Oil Capacity
2.90 gal / 11.0 L
Front Diff Fluid Capacity
6.70 gal / 25.4 L
Fuel Capacity
33.10 gal / 125.3 L
Gross Power
121 hp / 90.5 kW
Hydraulic System Fluid Capacity
29.10 gal / 110.2 L
Max Speed Forward
23.50 mph / 37.8 km/h
Max Speed Reverse
16.60 mph / 26.7 km/h
Max Torque
320 lb-ft / 434 Nm
Net Power
110 hp / 82.0 kW
Number of Forward Gears
6
Number of Reverse Gears
3
Operating Voltage
24 V
Operating Weight
18,038 lb / 8,182 kg
Power Measured @
2,200 rpm
Rear Axle Oscillation
25 lb / 11 kg
Rear Diff Fluid Capacity
6.70 gal / 25.4 L
Static Tipping Load - Bucket
8,755 lb / 3,971 kg
Static Tipping Load - Forks
7,372 lb / 3,344 kg
Torque Measured @
1,400 rpm
Transmission Fluid Capacity
6.40 gal / 24.2 L
Turning Radius
17.50 ft / 5.33 m
Hydraulics
Bucket Capacity - Heaped
1.40 yd³ / 1.07 m³
Dump Time
1.40 sec
Lower Time
3 sec
Net Power
95 hp / 70.8 kW
Pump Flow Capacity
103.10 gal/min / 390.3 L/min
Raise Time
4.60 sec
Relief Valve Setting
3,190 psi / 219.9 bar
Frequently Asked Questions
What is the operating weight of the JCB 412S Integrated Tool Carrier? +
The JCB 412S Integrated Tool Carrier has an operating weight of 18,038 lb (8,182 kg). This places it in a class suited for integrated tool carrier applications where ground pressure and transport weight are key considerations.
How powerful is the JCB 412S Integrated Tool Carrier engine? +
The JCB 412S Integrated Tool Carrier produces 121 hp (90.5 kW) of engine power. This output is typical for its weight class and designed to handle demanding Integrated Tool Carrier work cycles efficiently.
How does the JCB 412S Integrated Tool Carrier compare to similar Integrated Tool Carrier models? +
You can compare the JCB 412S Integrated Tool Carrier side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.