Overview
The JCB 414S Integrated Tool Carrier is a integrated tool carrier listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 150 hp, operating weight of 22,564 lb, travel speed of 23.7 mph, fuel capacity of 37.0 gal and hydraulic capacity of 34.4 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the JCB 414S Integrated Tool Carrier against similar integrated tool carrier models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
22,564.40
lb
Net Power
142
hp
Gross Power
152
hp
Bucket Capacity - Heaped
1.90
yd3
Full Specifications
45 specs
Dimensions
Breakout Force
12,095 lb / 5,486 kg
Bucket Capacity - Struck
1.60 yd³ / 1.22 m³
Dump Clearance At Max Lift
9.16 ft / 2.79 m
Fork Tine Length
4.01 ft / 1.22 m
Ground Clearance
1.17 ft / 0.36 m
Height to Top of Cab
9.75 ft / 2.97 m
Hinge Pin Max Height
12.08 ft / 3.68 m
Length W/ Bucket On Ground
21.30 ft / 6.49 m
Max Lift Height
11.53 ft / 3.51 m
Reach At Max Height And Dump
3.14 ft / 0.96 m
Wheelbase
9.19 ft / 2.80 m
Width Over Tires
8.04 ft / 2.45 m
Engine
Alternator Supplied Amperage
70 A
Cooling System Fluid Capacity
5.70 gal / 21.6 L
Displacement
360 cu in / 5.9 L
Engine Make
2301
Engine Model
AA5.9C
Engine Oil Capacity
3.70 gal / 14.0 L
Front Diff Fluid Capacity
6.10 gal / 23.1 L
Fuel Capacity
37 gal / 140.1 L
Gross Power
152 hp / 113.3 kW
Hydraulic System Fluid Capacity
34.40 gal / 130.2 L
Max Speed Forward
23.70 mph / 38.1 km/h
Max Speed Reverse
16.70 mph / 26.9 km/h
Max Torque
455 lb-ft / 617 Nm
Net Power
150 hp / 111.9 kW
Number of Forward Gears
6
Number of Reverse Gears
3
Operating Voltage
24 V
Operating Weight
22,564 lb / 10,235 kg
Power Measured @
2,200 rpm
Rear Axle Oscillation
25 lb / 11 kg
Rear Diff Fluid Capacity
6.10 gal / 23.1 L
Static Tipping Load - Bucket
11,444 lb / 5,191 kg
Static Tipping Load - Forks
8,583 lb / 3,893 kg
Torque Measured @
1,600 rpm
Transmission Fluid Capacity
7.30 gal / 27.6 L
Turning Radius
18.50 ft / 5.64 m
Hydraulics
Bucket Capacity - Heaped
1.90 yd³ / 1.45 m³
Dump Time
1.40 sec
Lower Time
3 sec
Net Power
142 hp / 105.9 kW
Pump Flow Capacity
113.60 gal/min / 430.0 L/min
Raise Time
4.60 sec
Relief Valve Setting
3,480 psi / 239.9 bar
Frequently Asked Questions
What is the operating weight of the JCB 414S Integrated Tool Carrier? +
The JCB 414S Integrated Tool Carrier has an operating weight of 22,564 lb (10,235 kg). This places it in a class suited for integrated tool carrier applications where ground pressure and transport weight are key considerations.
How powerful is the JCB 414S Integrated Tool Carrier engine? +
The JCB 414S Integrated Tool Carrier produces 152 hp (113.3 kW) of engine power. This output is typical for its weight class and designed to handle demanding Integrated Tool Carrier work cycles efficiently.
How does the JCB 414S Integrated Tool Carrier compare to similar Integrated Tool Carrier models? +
You can compare the JCB 414S Integrated Tool Carrier side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.