JCB · Integrated Tool Carrier

JCB 416HT High Lift Integrated Tool Carrier Specs

/5 · ratings Be the first to rate ✓ Thanks!

JCB

Overview

The JCB 416HT High Lift Integrated Tool Carrier is a integrated tool carrier listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 116 hp, operating weight of 21,484 lb, travel speed of 22.6 mph, fuel capacity of 36.9 gal and hydraulic capacity of 33.0 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the JCB 416HT High Lift Integrated Tool Carrier against similar integrated tool carrier models by power, weight, capacity, dimensions, speed, and other technical values.

Key Specifications

Operating Weight
21,484
lb

Net Power
116
hp

Gross Power
125
hp

Bucket Capacity - Heaped
1.80
yd3

Full Specifications

45 specs

Dimensions

Breakout Force 22,796 lb / 10,340 kg

Bucket Capacity - Struck 1.60 yd³ / 1.22 m³

Dump Clearance At Max Lift 11.74 ft / 3.58 m

Fork Tine Length 4.01 ft / 1.22 m

Ground Clearance 1.47 ft / 0.45 m

Height to Top of Cab 10.35 ft / 3.15 m

Hinge Pin Max Height 14.71 ft / 4.48 m

Length W/ Bucket On Ground 23.10 ft / 7.04 m

Max Lift Height 14.16 ft / 4.32 m

Reach At Max Height And Dump 3.56 ft / 1.09 m

Wheelbase 6.17 ft / 1.88 m

Width Over Tires 7.65 ft / 2.33 m

Engine

Alternator Supplied Amperage 55 A

Cooling System Fluid Capacity 6 gal / 22.7 L

Displacement 269 cu in / 4.4 L

Engine Make 2257

Engine Oil Capacity 2.80 gal / 10.6 L

Front Diff Fluid Capacity 6 gal / 22.7 L

Fuel Capacity 36.90 gal / 139.7 L

Gross Power 125 hp / 93.2 kW

Hydraulic System Fluid Capacity 33 gal / 124.9 L

Max Speed Forward 22.60 mph / 36.4 km/h

Max Speed Reverse 16.30 mph / 26.2 km/h

Max Torque 387 lb-ft / 525 Nm

Net Power 116 hp / 86.5 kW

Number of Cylinders 4

Number of Forward Gears 4

Number of Reverse Gears 3

Operating Voltage 24 V

Operating Weight 21,484 lb / 9,745 kg

Power Measured @ 2,200 rpm

Rear Axle Oscillation 25 lb / 11 kg

Rear Diff Fluid Capacity 6 gal / 22.7 L

Static Tipping Load - Bucket 11,372 lb / 5,158 kg

Static Tipping Load - Forks 8,944 lb / 4,057 kg

Torque Measured @ 1,400 rpm

Transmission Fluid Capacity 6.80 gal / 25.7 L

Turning Radius 19 ft / 5.79 m

Hydraulics

Bucket Capacity - Heaped 1.80 yd³ / 1.38 m³

Dump Time 1.40 sec

Lower Time 3 sec

Net Power 116 hp / 86.5 kW

Pump Flow Capacity 41.30 gal/min / 156.3 L/min

Raise Time 4.60 sec

Relief Valve Setting 3,190 psi / 219.9 bar

Related Machines

Caterpillar

930G Integrated Tool Carrier

Caterpillar

IT62H Integrated Tool Carrier

Caterpillar

IT38G Integrated Tool Carrier

Caterpillar

IT38H Integrated Tool Carrier

Caterpillar

IT62G Integrated Tool Carrier

Michigan

L70

Frequently Asked Questions

What is the operating weight of the JCB 416HT High Lift Integrated Tool Carrier? +

The JCB 416HT High Lift Integrated Tool Carrier has an operating weight of 21,484 lb (9,745 kg). This places it in a class suited for integrated tool carrier applications where ground pressure and transport weight are key considerations.

How powerful is the JCB 416HT High Lift Integrated Tool Carrier engine? +

The JCB 416HT High Lift Integrated Tool Carrier produces 125 hp (93.2 kW) of engine power. This output is typical for its weight class and designed to handle demanding Integrated Tool Carrier work cycles efficiently.

How does the JCB 416HT High Lift Integrated Tool Carrier compare to similar Integrated Tool Carrier models? +

You can compare the JCB 416HT High Lift Integrated Tool Carrier side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.