Overview
The JCB 416HT Integrated Tool Carrier is a integrated tool carrier listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 116 hp, operating weight of 22,725 lb, travel speed of 22.6 mph, fuel capacity of 36.9 gal and hydraulic capacity of 33.0 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the JCB 416HT Integrated Tool Carrier against similar integrated tool carrier models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
22,725
lb
Net Power
116
hp
Gross Power
125
hp
Bucket Capacity - Heaped
1.80
yd3
Full Specifications
45 specs
Dimensions
Breakout Force
22,570 lb / 10,238 kg
Bucket Capacity - Struck
1.60 yd³ / 1.22 m³
Dump Clearance At Max Lift
8.55 ft / 2.61 m
Fork Tine Length
4.01 ft / 1.22 m
Ground Clearance
1.47 ft / 0.45 m
Height to Top of Cab
10.35 ft / 3.15 m
Hinge Pin Max Height
11.92 ft / 3.63 m
Length W/ Bucket On Ground
19.99 ft / 6.09 m
Max Lift Height
11.34 ft / 3.46 m
Reach At Max Height And Dump
3.45 ft / 1.05 m
Wheelbase
9.19 ft / 2.80 m
Width Over Tires
7.65 ft / 2.33 m
Engine
Alternator Supplied Amperage
55 A
Cooling System Fluid Capacity
6 gal / 22.7 L
Displacement
269 cu in / 4.4 L
Engine Make
2257
Engine Oil Capacity
2.80 gal / 10.6 L
Front Diff Fluid Capacity
6 gal / 22.7 L
Fuel Capacity
36.90 gal / 139.7 L
Gross Power
125 hp / 93.2 kW
Hydraulic System Fluid Capacity
33 gal / 124.9 L
Max Speed Forward
22.60 mph / 36.4 km/h
Max Speed Reverse
16.30 mph / 26.2 km/h
Max Torque
387 lb-ft / 525 Nm
Net Power
116 hp / 86.5 kW
Number of Cylinders
4
Number of Forward Gears
4
Number of Reverse Gears
3
Operating Voltage
24 V
Operating Weight
22,725 lb / 10,308 kg
Power Measured @
2,200 rpm
Rear Axle Oscillation
25 lb / 11 kg
Rear Diff Fluid Capacity
6 gal / 22.7 L
Static Tipping Load - Bucket
16,472 lb / 7,472 kg
Static Tipping Load - Forks
12,048 lb / 5,465 kg
Torque Measured @
1,400 rpm
Transmission Fluid Capacity
6.80 gal / 25.7 L
Turning Radius
17.80 ft / 5.43 m
Hydraulics
Bucket Capacity - Heaped
1.80 yd³ / 1.38 m³
Dump Time
1.40 sec
Lower Time
3 sec
Net Power
116 hp / 86.5 kW
Pump Flow Capacity
41.30 gal/min / 156.3 L/min
Raise Time
4.60 sec
Relief Valve Setting
3,190 psi / 219.9 bar
Frequently Asked Questions
What is the operating weight of the JCB 416HT Integrated Tool Carrier? +
The JCB 416HT Integrated Tool Carrier has an operating weight of 22,725 lb (10,308 kg). This places it in a class suited for integrated tool carrier applications where ground pressure and transport weight are key considerations.
How powerful is the JCB 416HT Integrated Tool Carrier engine? +
The JCB 416HT Integrated Tool Carrier produces 125 hp (93.2 kW) of engine power. This output is typical for its weight class and designed to handle demanding Integrated Tool Carrier work cycles efficiently.
How does the JCB 416HT Integrated Tool Carrier compare to similar Integrated Tool Carrier models? +
You can compare the JCB 416HT Integrated Tool Carrier side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.