JCB · Integrated Tool Carrier

JCB 426HT High Lift Integrated Tool Carrier Specs

/5 · ratings Be the first to rate ✓ Thanks!

JCB

Overview

The JCB 426HT High Lift Integrated Tool Carrier is a integrated tool carrier listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 152 hp, operating weight of 29,436 lb, travel speed of 23.5 mph, fuel capacity of 61.0 gal and hydraulic capacity of 55.0 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the JCB 426HT High Lift Integrated Tool Carrier against similar integrated tool carrier models by power, weight, capacity, dimensions, speed, and other technical values.

Key Specifications

Operating Weight
29,436
lb

Net Power
152
hp

Gross Power
165
hp

Bucket Capacity - Heaped
2.50
yd3

Full Specifications

45 specs

Dimensions

Breakout Force 31,024 lb / 14,072 kg

Bucket Capacity - Struck 2.20 yd³ / 1.68 m³

Dump Clearance At Max Lift 10.70 ft / 3.26 m

Fork Tine Length 4.01 ft / 1.22 m

Ground Clearance 1.46 ft / 0.45 m

Height to Top of Cab 10.95 ft / 3.34 m

Hinge Pin Max Height 14.23 ft / 4.34 m

Length W/ Bucket On Ground 23.77 ft / 7.25 m

Max Lift Height 13.61 ft / 4.15 m

Reach At Max Height And Dump 4.08 ft / 1.24 m

Wheelbase 9.85 ft / 3.00 m

Width Over Tires 8.53 ft / 2.60 m

Engine

Alternator Supplied Amperage 70 A

Cooling System Fluid Capacity 9 gal / 34.1 L

Displacement 409 cu in / 6.7 L

Engine Model QB6.7

Engine Oil Capacity 3.70 gal / 14.0 L

Front Diff Fluid Capacity 10.30 gal / 39.0 L

Fuel Capacity 61 gal / 230.9 L

Gross Power 165 hp / 123.0 kW

Hydraulic System Fluid Capacity 55 gal / 208.2 L

Max Speed Forward 23.50 mph / 37.8 km/h

Max Speed Reverse 15.60 mph / 25.1 km/h

Max Torque 540 lb-ft / 732 Nm

Net Power 152 hp / 113.3 kW

Number of Cylinders 6

Number of Forward Gears 4

Number of Reverse Gears 3

Operating Voltage 24 V

Operating Weight 29,436 lb / 13,352 kg

Power Measured @ 2,200 rpm

Rear Axle Oscillation 21 lb / 10 kg

Rear Diff Fluid Capacity 9.80 gal / 37.1 L

Static Tipping Load - Bucket 19,407 lb / 8,803 kg

Static Tipping Load - Forks 14,521 lb / 6,587 kg

Torque Measured @ 1,400 rpm

Transmission Fluid Capacity 7 gal / 26.5 L

Turning Radius 20.70 ft / 6.31 m

Hydraulics

Bucket Capacity - Heaped 2.50 yd³ / 1.91 m³

Dump Time 1 sec

Lower Time 2.70 sec

Net Power 152 hp / 113.3 kW

Pump Flow Capacity 69.80 gal/min / 264.2 L/min

Raise Time 4.40 sec

Relief Valve Setting 3,625 psi / 249.9 bar

Related Machines

Caterpillar

930G Integrated Tool Carrier

Caterpillar

IT62H Integrated Tool Carrier

Caterpillar

IT38G Integrated Tool Carrier

Caterpillar

IT38H Integrated Tool Carrier

Caterpillar

IT62G Integrated Tool Carrier

Michigan

L70

Frequently Asked Questions

What is the operating weight of the JCB 426HT High Lift Integrated Tool Carrier? +

The JCB 426HT High Lift Integrated Tool Carrier has an operating weight of 29,436 lb (13,352 kg). This places it in a class suited for integrated tool carrier applications where ground pressure and transport weight are key considerations.

How powerful is the JCB 426HT High Lift Integrated Tool Carrier engine? +

The JCB 426HT High Lift Integrated Tool Carrier produces 165 hp (123.0 kW) of engine power. This output is typical for its weight class and designed to handle demanding Integrated Tool Carrier work cycles efficiently.

How does the JCB 426HT High Lift Integrated Tool Carrier compare to similar Integrated Tool Carrier models? +

You can compare the JCB 426HT High Lift Integrated Tool Carrier side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.