Overview
The JCB 426HTM Integrated Tool Carrier is a integrated tool carrier listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 150 hp, travel speed of 24.0 mph, fuel capacity of 55.5 gal and hydraulic capacity of 55.5 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the JCB 426HTM Integrated Tool Carrier against similar integrated tool carrier models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Net Power
150
hp
Gross Power
152
hp
Bucket Capacity - Heaped
2.40
yd3
Full Specifications
36 specs
Dimensions
Breakout Force
31,024 lb / 14,072 kg
Bucket Capacity - Struck
2.10 yd³ / 1.61 m³
Dump Clearance At Max Lift
9.29 ft / 2.83 m
Fork Tine Length
4.01 ft / 1.22 m
Max Lift Height
12.20 ft / 3.72 m
Reach At Max Height And Dump
3.55 ft / 1.08 m
Width Over Tires
8.37 ft / 2.55 m
Engine
Alternator Supplied Amperage
70 A
Cooling System Fluid Capacity
9.30 gal / 35.2 L
Displacement
360 cu in / 5.9 L
Engine Make
2347
Engine Model
BTAA5.9C
Engine Oil Capacity
3.70 gal / 14.0 L
Front Diff Fluid Capacity
10.40 gal / 39.4 L
Fuel Capacity
55.50 gal / 210.1 L
Gross Power
152 hp / 113.3 kW
Hydraulic System Fluid Capacity
55.50 gal / 210.1 L
Max Speed Forward
24 mph / 38.6 km/h
Max Speed Reverse
15.10 mph / 24.3 km/h
Max Torque
336 lb-ft / 455 Nm
Net Power
150 hp / 111.9 kW
Number of Forward Gears
4
Number of Reverse Gears
3
Operating Voltage
24 V
Power Measured @
2,000 rpm
Rear Axle Oscillation
25 lb / 11 kg
Rear Diff Fluid Capacity
9.80 gal / 37.1 L
Static Tipping Load - Forks
14,771 lb / 6,700 kg
Torque Measured @
1,600 rpm
Transmission Fluid Capacity
8 gal / 30.3 L
Hydraulics
Bucket Capacity - Heaped
2.40 yd³ / 1.83 m³
Dump Time
1 sec
Lower Time
2.70 sec
Pump Flow Capacity
108.40 gal/min / 410.3 L/min
Raise Time
4.40 sec
Relief Valve Setting
3,625 psi / 249.9 bar
Frequently Asked Questions
How powerful is the JCB 426HTM Integrated Tool Carrier engine? +
The JCB 426HTM Integrated Tool Carrier produces 152 hp (113.3 kW) of engine power. This output is typical for its weight class and designed to handle demanding Integrated Tool Carrier work cycles efficiently.
How does the JCB 426HTM Integrated Tool Carrier compare to similar Integrated Tool Carrier models? +
You can compare the JCB 426HTM Integrated Tool Carrier side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.