JCB · Integrated Tool Carrier

JCB 436HT High Lift Integrated Tool Carrier Specs

/5 · ratings Be the first to rate ✓ Thanks!

JCB

Overview

The JCB 436HT High Lift Integrated Tool Carrier is a integrated tool carrier listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 165 hp, operating weight of 33,892 lb, travel speed of 23.5 mph, fuel capacity of 61.0 gal and hydraulic capacity of 55.0 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the JCB 436HT High Lift Integrated Tool Carrier against similar integrated tool carrier models by power, weight, capacity, dimensions, speed, and other technical values.

Key Specifications

Operating Weight
33,892
lb

Net Power
165
hp

Gross Power
177
hp

Bucket Capacity - Heaped
3.10
yd3

Full Specifications

46 specs

Dimensions

Breakout Force 33,047 lb / 14,990 kg

Bucket Capacity - Struck 2.70 yd³ / 2.06 m³

Dump Clearance At Max Lift 11.91 ft / 3.63 m

Fork Tine Length 4.01 ft / 1.22 m

Ground Clearance 1.51 ft / 0.46 m

Height to Top of Cab 10.95 ft / 3.34 m

Hinge Pin Max Height 15.26 ft / 4.65 m

Length W/ Bucket On Ground 23.90 ft / 7.28 m

Max Lift Height 14.71 ft / 4.48 m

Reach At Max Height And Dump 3.43 ft / 1.05 m

Wheelbase 9.85 ft / 3.00 m

Width Over Tires 8.53 ft / 2.60 m

Engine

Alternator Supplied Amperage 70 A

Cooling System Fluid Capacity 9 gal / 34.1 L

Displacement 360 cu in / 5.9 L

Engine Make 2347

Engine Model BTAA 5.9C

Engine Oil Capacity 3.70 gal / 14.0 L

Front Diff Fluid Capacity 10.30 gal / 39.0 L

Fuel Capacity 61 gal / 230.9 L

Gross Power 177 hp / 132.0 kW

Hydraulic System Fluid Capacity 55 gal / 208.2 L

Max Speed Forward 23.50 mph / 37.8 km/h

Max Speed Reverse 16.80 mph / 27.0 km/h

Max Torque 580 lb-ft / 786 Nm

Net Power 165 hp / 123.0 kW

Number of Cylinders 6

Number of Forward Gears 4

Number of Reverse Gears 3

Operating Voltage 24 V

Operating Weight 33,892 lb / 15,373 kg

Power Measured @ 2,200 rpm

Rear Axle Oscillation 21 lb / 10 kg

Rear Diff Fluid Capacity 10.30 gal / 39.0 L

Static Tipping Load - Bucket 20,426 lb / 9,265 kg

Static Tipping Load - Forks 15,147 lb / 6,871 kg

Torque Measured @ 1,300 rpm

Transmission Fluid Capacity 8.50 gal / 32.2 L

Turning Radius 21.80 ft / 6.64 m

Hydraulics

Bucket Capacity - Heaped 3.10 yd³ / 2.37 m³

Dump Time 1 sec

Lower Time 3.40 sec

Net Power 165 hp / 123.0 kW

Pump Flow Capacity 69.80 gal/min / 264.2 L/min

Raise Time 5.90 sec

Relief Valve Setting 3,625 psi / 249.9 bar

Related Machines

Caterpillar

930G Integrated Tool Carrier

Caterpillar

IT62H Integrated Tool Carrier

Caterpillar

IT38G Integrated Tool Carrier

Caterpillar

IT38H Integrated Tool Carrier

Caterpillar

IT62G Integrated Tool Carrier

Michigan

L70

Frequently Asked Questions

What is the operating weight of the JCB 436HT High Lift Integrated Tool Carrier? +

The JCB 436HT High Lift Integrated Tool Carrier has an operating weight of 33,892 lb (15,373 kg). This places it in a class suited for integrated tool carrier applications where ground pressure and transport weight are key considerations.

How powerful is the JCB 436HT High Lift Integrated Tool Carrier engine? +

The JCB 436HT High Lift Integrated Tool Carrier produces 177 hp (132.0 kW) of engine power. This output is typical for its weight class and designed to handle demanding Integrated Tool Carrier work cycles efficiently.

How does the JCB 436HT High Lift Integrated Tool Carrier compare to similar Integrated Tool Carrier models? +

You can compare the JCB 436HT High Lift Integrated Tool Carrier side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.