Overview
The JCB 436ZX Integrated Tool Carrier is a integrated tool carrier listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 165 hp, operating weight of 35,860 lb, travel speed of 23.5 mph, fuel capacity of 61.0 gal and hydraulic capacity of 55.0 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the JCB 436ZX Integrated Tool Carrier against similar integrated tool carrier models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
35,860
lb
Net Power
165
hp
Gross Power
178
hp
Bucket Capacity - Heaped
3
yd3
Full Specifications
46 specs
Dimensions
Breakout Force
39,565 lb / 17,946 kg
Bucket Capacity - Struck
2.60 yd³ / 1.99 m³
Dump Clearance At Max Lift
9.33 ft / 2.84 m
Fork Tine Length
4.01 ft / 1.22 m
Ground Clearance
1.51 ft / 0.46 m
Height to Top of Cab
10.95 ft / 3.34 m
Hinge Pin Max Height
13.12 ft / 4.00 m
Length W/ Bucket On Ground
23.53 ft / 7.17 m
Max Lift Height
12.53 ft / 3.82 m
Reach At Max Height And Dump
4.12 ft / 1.26 m
Wheelbase
9.85 ft / 3.00 m
Width Over Tires
8.53 ft / 2.60 m
Engine
Alternator Supplied Amperage
70 A
Cooling System Fluid Capacity
9 gal / 34.1 L
Displacement
409 cu in / 6.7 L
Engine Make
2347
Engine Model
QSB 6.7
Engine Oil Capacity
3.70 gal / 14.0 L
Front Diff Fluid Capacity
10.30 gal / 39.0 L
Fuel Capacity
61 gal / 230.9 L
Gross Power
178 hp / 132.7 kW
Hydraulic System Fluid Capacity
55 gal / 208.2 L
Max Speed Forward
23.50 mph / 37.8 km/h
Max Speed Reverse
16.80 mph / 27.0 km/h
Max Torque
590 lb-ft / 800 Nm
Net Power
165 hp / 123.0 kW
Number of Cylinders
6
Number of Forward Gears
4
Number of Reverse Gears
3
Operating Voltage
24 V
Operating Weight
35,860 lb / 16,266 kg
Power Measured @
2,200 rpm
Rear Axle Oscillation
21 lb / 10 kg
Rear Diff Fluid Capacity
9.80 gal / 37.1 L
Static Tipping Load - Bucket
25,880 lb / 11,739 kg
Static Tipping Load - Forks
18,274 lb / 8,289 kg
Torque Measured @
1,400 rpm
Transmission Fluid Capacity
7 gal / 26.5 L
Turning Radius
19.40 ft / 5.91 m
Hydraulics
Bucket Capacity - Heaped
3 yd³ / 2.29 m³
Dump Time
1 sec
Lower Time
3.40 sec
Net Power
165 hp / 123.0 kW
Pump Flow Capacity
69.80 gal/min / 264.2 L/min
Raise Time
5.90 sec
Relief Valve Setting
3,625 psi / 249.9 bar
Frequently Asked Questions
What is the operating weight of the JCB 436ZX Integrated Tool Carrier? +
The JCB 436ZX Integrated Tool Carrier has an operating weight of 35,860 lb (16,266 kg). This places it in a class suited for integrated tool carrier applications where ground pressure and transport weight are key considerations.
How powerful is the JCB 436ZX Integrated Tool Carrier engine? +
The JCB 436ZX Integrated Tool Carrier produces 178 hp (132.7 kW) of engine power. This output is typical for its weight class and designed to handle demanding Integrated Tool Carrier work cycles efficiently.
How does the JCB 436ZX Integrated Tool Carrier compare to similar Integrated Tool Carrier models? +
You can compare the JCB 436ZX Integrated Tool Carrier side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.