JCB · Integrated Tool Carrier

JCB 456 Wastemaster Integrated Tool Carrier Specs

/5 · ratings Be the first to rate ✓ Thanks!

JCB

Overview

The JCB 456 Wastemaster Integrated Tool Carrier is a integrated tool carrier listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 197 hp, operating weight of 47,679 lb, travel speed of 23.3 mph, fuel capacity of 97.8 gal and hydraulic capacity of 56.8 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the JCB 456 Wastemaster Integrated Tool Carrier against similar integrated tool carrier models by power, weight, capacity, dimensions, speed, and other technical values.

Key Specifications

Operating Weight
47,679.40
lb

Net Power
200
hp

Gross Power
216
hp

Bucket Capacity - Heaped
4.60
yd3

Full Specifications

43 specs

Dimensions

Breakout Force 32,597 lb / 14,786 kg

Bucket Capacity - Struck 3.80 yd³ / 2.91 m³

Dump Clearance At Max Lift 13.23 ft / 4.03 m

Ground Clearance 1.55 ft / 0.47 m

Height to Top of Cab 11.19 ft / 3.41 m

Hinge Pin Max Height 17.43 ft / 5.31 m

Length W/ Bucket On Ground 31.07 ft / 9.47 m

Reach At Max Height And Dump 4.34 ft / 1.32 m

Wheelbase 10.83 ft / 3.30 m

Width Over Tires 8.87 ft / 2.70 m

Engine

-- JCB 456HT Super High Lift

Alternator Supplied Amperage 70 A

Cooling System Fluid Capacity 10.60 gal / 40.1 L

Displacement 507 cu in / 8.3 L

Engine Make 2347

Engine Model 6CT 8.3C

Engine Oil Capacity 5 gal / 18.9 L

Front Diff Fluid Capacity 18.30 gal / 69.3 L

Fuel Capacity 97.80 gal / 370.2 L

Gross Power 216 hp / 161.1 kW

Hydraulic System Fluid Capacity 56.80 gal / 215.0 L

Max Speed Forward 23.30 mph / 37.5 km/h

Max Speed Reverse 15.20 mph / 24.5 km/h

Max Torque 665 lb-ft / 902 Nm

Net Power 197 hp / 146.9 kW

Number of Forward Gears 4

Number of Reverse Gears 3

Operating Voltage 24 V

Operating Weight 47,679 lb / 21,627 kg

Power Measured @ 2,200 rpm

Rear Axle Oscillation 25 lb / 11 kg

Rear Diff Fluid Capacity 13.50 gal / 51.1 L

Static Tipping Load - Bucket 21,358 lb / 9,688 kg

Torque Measured @ 1,400 rpm

Transmission Fluid Capacity 9 gal / 34.1 L

Turning Radius 21.80 ft / 6.64 m

Hydraulics

Bucket Capacity - Heaped 4.60 yd³ / 3.52 m³

Dump Time 1.20 sec

Lower Time 4.10 sec

Net Power 200 hp / 149.1 kW

Pump Flow Capacity 108.40 gal/min / 410.3 L/min

Raise Time 5.80 sec

Relief Valve Setting 3,625 psi / 249.9 bar

Related Machines

Caterpillar

930G Integrated Tool Carrier

Caterpillar

IT62H Integrated Tool Carrier

Caterpillar

IT38G Integrated Tool Carrier

Caterpillar

IT38H Integrated Tool Carrier

Caterpillar

IT62G Integrated Tool Carrier

Michigan

L70

Frequently Asked Questions

What is the operating weight of the JCB 456 Wastemaster Integrated Tool Carrier? +

The JCB 456 Wastemaster Integrated Tool Carrier has an operating weight of 47,679 lb (21,627 kg). This places it in a class suited for integrated tool carrier applications where ground pressure and transport weight are key considerations.

How powerful is the JCB 456 Wastemaster Integrated Tool Carrier engine? +

The JCB 456 Wastemaster Integrated Tool Carrier produces 216 hp (161.1 kW) of engine power. This output is typical for its weight class and designed to handle demanding Integrated Tool Carrier work cycles efficiently.

How does the JCB 456 Wastemaster Integrated Tool Carrier compare to similar Integrated Tool Carrier models? +

You can compare the JCB 456 Wastemaster Integrated Tool Carrier side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.