John Deere Construction & Forestry · Integrated Tool Carrier

John Deere 244J Integrated Tool Carrier Specs

/5 · ratings Be the first to rate ✓ Thanks!

John Deere...

Overview

The John Deere Construction & Forestry John Deere 244J Integrated Tool Carrier is a integrated tool carrier listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 67 hp, operating weight of 11,552 lb, travel speed of 18.7 mph, fuel capacity of 21.2 gal and hydraulic capacity of 15.9 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the John Deere Construction & Forestry John Deere 244J Integrated Tool Carrier against similar integrated tool carrier models by power, weight, capacity, dimensions, speed, and other technical values.

Key Specifications

Operating Weight
11,552.30
lb

Net Power
67
hp

Bucket Capacity - Heaped
1
yd3

Full Specifications

45 specs

Dimensions

Breakout Force 10,792 lb / 4,895 kg

Bucket Capacity - Struck 0.90 yd³ / 0.69 m³

Dump Clearance At Max Lift 8.37 ft / 2.55 m

Fork Tine Length 3.94 ft / 1.20 m

Ground Clearance 0.97 ft / 0.30 m

Height to Top of Cab 8.95 ft / 2.73 m

Hinge Pin Max Height 10.54 ft / 3.21 m

Length W/ Bucket On Ground 17.38 ft / 5.30 m

Length With Out Forks On Ground 19.05 ft / 5.81 m

Max Lift Height 9.98 ft / 3.04 m

Reach At Max Height And Dump 3.84 ft / 1.17 m

Wheelbase 7.06 ft / 2.15 m

Width Over Tires 6.07 ft / 1.85 m

Engine

Alternator Supplied Amperage 65 A

Cooling System Fluid Capacity 2.70 gal / 10.2 L

Displacement 147 cu in / 2.4 L

Engine Make 2240

Engine Model 4024T

Engine Oil Capacity 2.30 gal / 8.7 L

Front Diff Fluid Capacity 1.10 gal / 4.2 L

Fuel Capacity 21.20 gal / 80.3 L

Hydraulic System Fluid Capacity 15.90 gal / 60.2 L

Max Speed Forward 18.70 mph / 30.1 km/h

Max Speed Reverse 18.70 mph / 30.1 km/h

Max Torque 163 lb-ft / 221 Nm

Net Power 64 hp / 47.7 kW

Number of Cylinders 4

Number of Forward Gears 2

Number of Reverse Gears 2

Operating Voltage 12 V

Operating Weight 11,552 lb / 5,240 kg

Power Measured @ 2,600 rpm

Rear Axle Oscillation 20 lb / 9 kg

Rear Diff Fluid Capacity 1.10 gal / 4.2 L

Static Tipping Load - Bucket 8,457 lb / 3,836 kg

Static Tipping Load - Forks 6,405 lb / 2,905 kg

Torque Measured @ 1,600 rpm

Turning Radius 11.50 ft / 3.51 m

Hydraulics

Bucket Capacity - Heaped 1 yd³ / 0.76 m³

Dump Time 1.40 sec

Lower Time 4 sec

Net Power 67 hp / 50.0 kW

Pump Flow Capacity 17.10 gal/min / 64.7 L/min

Raise Time 4.90 sec

Relief Valve Setting 3,190 psi / 219.9 bar

Related Machines

Caterpillar

930G Integrated Tool Carrier

Caterpillar

IT62H Integrated Tool Carrier

Caterpillar

IT38G Integrated Tool Carrier

Caterpillar

IT38H Integrated Tool Carrier

Caterpillar

IT62G Integrated Tool Carrier

Michigan

L70

Frequently Asked Questions

What is the operating weight of the John Deere Construction & Forestry John Deere 244J Integrated Tool Carrier? +

The John Deere Construction & Forestry John Deere 244J Integrated Tool Carrier has an operating weight of 11,552 lb (5,240 kg). This places it in a class suited for integrated tool carrier applications where ground pressure and transport weight are key considerations.

How powerful is the John Deere Construction & Forestry John Deere 244J Integrated Tool Carrier engine? +

The John Deere Construction & Forestry John Deere 244J Integrated Tool Carrier produces 64 hp (47.7 kW) of engine power. This output is typical for its weight class and designed to handle demanding Integrated Tool Carrier work cycles efficiently.

How does the John Deere Construction & Forestry John Deere 244J Integrated Tool Carrier compare to similar Integrated Tool Carrier models? +

You can compare the John Deere Construction & Forestry John Deere 244J Integrated Tool Carrier side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.