Overview
The Michigan L120 is a integrated tool carrier listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 190 hp, operating weight of 34,190 lb, travel speed of 24.0 mph, fuel capacity of 56.8 gal and hydraulic capacity of 67.4 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Michigan L120 against similar integrated tool carrier models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
34,190
lb
Net Power
200
hp
Gross Power
200
hp
Bucket Capacity - Heaped
4
yd3
Full Specifications
51 specs
Dimensions
Breakout Force
28,420 lb / 12,891 kg
Bucket Capacity - Struck
3.60 yd³ / 2.75 m³
Dump Clearance At Max Lift
9.32 ft / 2.84 m
Ground Clearance
1.48 ft / 0.45 m
Height At Hook Max Reach
5.57 ft / 1.70 m
Height to Top of Cab
11.11 ft / 3.39 m
Hinge Pin Max Height
13.10 ft / 3.99 m
Hook Height At Max Lift - Extended
23.92 ft / 7.29 m
Hook Height At Max Lift - Standard
20.44 ft / 6.23 m
Hook Reach At Max Lift - Extended
8.62 ft / 2.63 m
Hook Reach At Max Lift - Standard
6.67 ft / 2.03 m
Length W/ Bucket On Ground
25.34 ft / 7.72 m
Reach At Max Height And Dump
3.68 ft / 1.12 m
Wheelbase
10.50 ft / 3.20 m
Width Over Tires
8.80 ft / 2.68 m
Engine
--
Caterpillar IT38H
Alternator Supplied Amperage
55 A
Cooling System Fluid Capacity
17.20 gal / 65.1 L
Displacement
409 cu in / 6.7 L
Engine Make
2244
Engine Model
TD71G
Engine Oil Capacity
5.90 gal / 22.3 L
Front Diff Fluid Capacity
9.30 gal / 35.2 L
Fuel Capacity
56.80 gal / 215.0 L
Gross Power
200 hp / 149.1 kW
Hydraulic System Fluid Capacity
67.40 gal / 255.1 L
Max Speed Forward
24 mph / 38.6 km/h
Max Speed Reverse
16.70 mph / 26.9 km/h
Max Torque
524 lb-ft / 710 Nm
Net Power
190 hp / 141.7 kW
Number of Cylinders
6
Number of Forward Gears
4
Number of Reverse Gears
3
Operating Voltage
24 V
Operating Weight
34,190 lb / 15,508 kg
Power Measured @
2,200 rpm
Rear Axle Oscillation
26 lb / 12 kg
Rear Diff Fluid Capacity
10.10 gal / 38.2 L
Static Tipping Load - Bucket
27,980 lb / 12,692 kg
Torque Measured @
1,400 rpm
Transmission Fluid Capacity
8.80 gal / 33.3 L
Transmission Type
Volvo BM HT 131 automatic powershift
Turning Radius
20.50 ft / 6.25 m
Width
9.40 ft / 2.87 m
Hydraulics
Bucket Capacity - Heaped
4 yd³ / 3.06 m³
Dump Time
1.50 sec
Lower Time
3.10 sec
Net Power
200 hp / 149.1 kW
Pump Flow Capacity
51.80 gal/min / 196.1 L/min
Raise Time
6.50 sec
Relief Valve Setting
3,050 psi / 210.3 bar
Frequently Asked Questions
What is the operating weight of the Michigan L120? +
The Michigan L120 has an operating weight of 34,190 lb (15,508 kg). This places it in a class suited for integrated tool carrier applications where ground pressure and transport weight are key considerations.
How powerful is the Michigan L120 engine? +
The Michigan L120 produces 200 hp (149.1 kW) of engine power. This output is typical for its weight class and designed to handle demanding Integrated Tool Carrier work cycles efficiently.
How does the Michigan L120 compare to similar Integrated Tool Carrier models? +
You can compare the Michigan L120 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.