Overview
The Michigan L160 is a integrated tool carrier listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 207 hp, operating weight of 49,195 lb, travel speed of 24.8 mph, fuel capacity of 89.9 gal and hydraulic capacity of 84.6 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Michigan L160 against similar integrated tool carrier models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
49,195
lb
Net Power
207
hp
Gross Power
264
hp
Bucket Capacity - Heaped
5
yd3
Full Specifications
50 specs
Dimensions
Breakout Force
40,182 lb / 18,226 kg
Bucket Capacity - Struck
4.60 yd³ / 3.52 m³
Dump Clearance At Max Lift
10.44 ft / 3.18 m
Fork Tine Length
4.93 ft / 1.50 m
Ground Clearance
1.60 ft / 0.49 m
Height to Top of Cab
12.10 ft / 3.69 m
Hinge Pin Max Height
14.59 ft / 4.45 m
Length W/ Bucket On Ground
26.71 ft / 8.14 m
Length With Out Forks On Ground
26.81 ft / 8.17 m
Max Lift Height
2.74 ft / 0.84 m
Reach At Max Height And Dump
3.78 ft / 1.15 m
Wheelbase
11.65 ft / 3.55 m
Width Over Tires
9.86 ft / 3.01 m
Engine
Alternator Supplied Amperage
60 A
Cooling System Fluid Capacity
18.50 gal / 70.0 L
Displacement
586 cu in / 9.6 L
Engine Make
2244
Engine Model
TD102GB
Engine Oil Capacity
7.20 gal / 27.3 L
Front Diff Fluid Capacity
11.90 gal / 45.0 L
Fuel Capacity
89.90 gal / 340.3 L
Gross Power
264 hp / 196.9 kW
Hydraulic System Fluid Capacity
84.60 gal / 320.2 L
Max Speed Forward
24.80 mph / 39.9 km/h
Max Speed Reverse
24.80 mph / 39.9 km/h
Max Torque
710 lb-ft / 962 Nm
Net Power
252 hp / 187.9 kW
Number of Cylinders
6
Number of Forward Gears
4
Number of Reverse Gears
4
Operating Voltage
24 V
Operating Weight
49,195 lb / 22,314 kg
Power Measured @
2,200 rpm
Rear Axle Oscillation
30 lb / 14 kg
Rear Diff Fluid Capacity
14.80 gal / 56.0 L
Static Tipping Load - Bucket
37,390 lb / 16,960 kg
Static Tipping Load - Forks
22,487 lb / 10,200 kg
Tire Size
26.50 in / 673 mm
Torque Measured @
1,400 rpm
Transmission Fluid Capacity
12.50 gal / 47.3 L
Transmission Type
Volvo BM HT 200 automatic powershift
Turning Radius
24.30 ft / 7.41 m
Width
10.50 ft / 3.20 m
Hydraulics
Bucket Capacity - Heaped
5 yd³ / 3.82 m³
Dump Time
1.90 sec
Lower Time
2.80 sec
Net Power
207 hp / 154.4 kW
Pump Flow Capacity
66.10 gal/min / 250.2 L/min
Raise Time
7 sec
Relief Valve Setting
2,900 psi / 199.9 bar
Frequently Asked Questions
What is the operating weight of the Michigan L160? +
The Michigan L160 has an operating weight of 49,195 lb (22,314 kg). This places it in a class suited for integrated tool carrier applications where ground pressure and transport weight are key considerations.
How powerful is the Michigan L160 engine? +
The Michigan L160 produces 264 hp (196.9 kW) of engine power. This output is typical for its weight class and designed to handle demanding Integrated Tool Carrier work cycles efficiently.
How does the Michigan L160 compare to similar Integrated Tool Carrier models? +
You can compare the Michigan L160 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.