Overview
The Michigan L30 is a integrated tool carrier listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 64 hp, operating weight of 13,100 lb, travel speed of 21.9 mph, fuel capacity of 25.1 gal and hydraulic capacity of 2.7 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Michigan L30 against similar integrated tool carrier models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
13,100
lb
Net Power
64
hp
Gross Power
74
hp
Bucket Capacity - Heaped
0.80
yd3
Full Specifications
57 specs
Dimensions
Breakout Force
12,320 lb / 5,588 kg
Bucket Capacity - Struck
0.90 yd³ / 0.69 m³
Dump Clearance At Max Lift
9.22 ft / 2.81 m
Fork Tine Length
3.45 ft / 1.05 m
Ground Clearance
1.38 ft / 0.42 m
Height At Hook Max Reach
4.88 ft / 1.49 m
Height to Top of Cab
9.13 ft / 2.78 m
Hinge Pin Max Height
11.78 ft / 3.59 m
Hook Height At Max Lift - Extended
22.04 ft / 6.72 m
Hook Height At Max Lift - Standard
19.02 ft / 5.80 m
Hook Max Reach - Extended
17.48 ft / 5.33 m
Hook Max Reach - Standard
10.27 ft / 3.13 m
Hook Reach At Max Lift - Extended
9.26 ft / 2.82 m
Hook Reach At Max Lift - Standard
7.09 ft / 2.16 m
Length W/ Bucket On Ground
18.38 ft / 5.60 m
Length With Out Forks On Ground
18.84 ft / 5.74 m
Max Lift Height
11.32 ft / 3.45 m
Reach At Max Height And Dump
2.50 ft / 0.76 m
Wheelbase
8.95 ft / 2.73 m
Width Over Tires
6.53 ft / 1.99 m
Engine
Alternator Supplied Amperage
45 A
Cooling System Fluid Capacity
27.80 gal / 105.2 L
Displacement
236 cu in / 3.9 L
Engine Make
2351
Engine Model
4.236
Engine Oil Capacity
2.20 gal / 8.3 L
Front Diff Fluid Capacity
5.90 gal / 22.3 L
Fuel Capacity
25.10 gal / 95.0 L
Gross Power
74 hp / 55.2 kW
Hydraulic System Fluid Capacity
2.70 gal / 10.2 L
Max Speed Forward
21.90 mph / 35.2 km/h
Max Speed Reverse
21.90 mph / 35.2 km/h
Max Torque
204 lb-ft / 276 Nm
Net Power
77 hp / 57.4 kW
Number of Cylinders
4
Number of Forward Gears
3
Number of Reverse Gears
3
Operating Voltage
24 V
Operating Weight
13,100 lb / 5,942 kg
Power Measured @
2,200 rpm
Rear Axle Oscillation
20 lb / 9 kg
Rear Diff Fluid Capacity
2.70 gal / 10.2 L
Static Tipping Load - Bucket
8,135 lb / 3,690 kg
Static Tipping Load - Forks
9,722 lb / 4,410 kg
Static Tipping Load - Material Handler
3,157 lb / 1,432 kg
Torque Measured @
1,400 rpm
Transmission Fluid Capacity
6.40 gal / 24.2 L
Transmission Type
Clark 18000 Series constant mesh automatic powershift transmission
Turning Radius
17 ft / 5.18 m
Width
7 ft / 2.13 m
Hydraulics
Bucket Capacity - Heaped
0.80 yd³ / 0.61 m³
Dump Time
1.30 sec
Lower Time
2.20 sec
Net Power
64 hp / 47.7 kW
Pump Flow Capacity
27.20 gal/min / 103.0 L/min
Raise Time
5.40 sec
Relief Valve Setting
2,175 psi / 150.0 bar
Frequently Asked Questions
What is the operating weight of the Michigan L30? +
The Michigan L30 has an operating weight of 13,100 lb (5,942 kg). This places it in a class suited for integrated tool carrier applications where ground pressure and transport weight are key considerations.
How powerful is the Michigan L30 engine? +
The Michigan L30 produces 74 hp (55.2 kW) of engine power. This output is typical for its weight class and designed to handle demanding Integrated Tool Carrier work cycles efficiently.
How does the Michigan L30 compare to similar Integrated Tool Carrier models? +
You can compare the Michigan L30 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.