Overview
The Michigan L50B is a integrated tool carrier listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 91 hp, operating weight of 17,860 lb, travel speed of 22.6 mph, fuel capacity of 45.0 gal and hydraulic capacity of 28.1 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Michigan L50B against similar integrated tool carrier models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
17,860
lb
Net Power
110
hp
Gross Power
96
hp
Bucket Capacity - Heaped
2
yd3
Full Specifications
52 specs
Dimensions
Breakout Force
13,624 lb / 6,180 kg
Bucket Capacity - Struck
1.50 yd³ / 1.15 m³
Dump Clearance At Max Lift
9.09 ft / 2.77 m
Fork Tine Length
4.02 ft / 1.23 m
Ground Clearance
1.25 ft / 0.38 m
Height At Hook Max Reach
4.73 ft / 1.44 m
Height to Top of Cab
9.88 ft / 3.01 m
Hinge Pin Max Height
12.18 ft / 3.71 m
Hook Height At Max Lift - Extended
22.35 ft / 6.81 m
Hook Height At Max Lift - Standard
19.30 ft / 5.88 m
Hook Max Reach - Extended
5.22 ft / 1.59 m
Hook Max Reach - Standard
10.86 ft / 3.31 m
Hook Reach At Max Lift - Extended
9.52 ft / 2.90 m
Hook Reach At Max Lift - Standard
7.39 ft / 2.25 m
Length W/ Bucket On Ground
20.94 ft / 6.38 m
Length With Out Forks On Ground
21.15 ft / 6.45 m
Max Lift Height
11.65 ft / 3.55 m
Reach At Max Height And Dump
3.42 ft / 1.04 m
Wheelbase
9.03 ft / 2.75 m
Width Over Tires
7.03 ft / 2.14 m
Engine
Alternator Supplied Amperage
60 A
Cooling System Fluid Capacity
5.90 gal / 22.3 L
Displacement
244 cu in / 4.0 L
Engine Model
VME TD 40GA
Engine Oil Capacity
3 gal / 11.4 L
Front Diff Fluid Capacity
6.40 gal / 24.2 L
Fuel Capacity
45 gal / 170.3 L
Gross Power
96 hp / 71.6 kW
Hydraulic System Fluid Capacity
28.10 gal / 106.4 L
Max Speed Forward
22.60 mph / 36.4 km/h
Max Speed Reverse
22.60 mph / 36.4 km/h
Max Torque
273 lb-ft / 370 Nm
Net Power
91 hp / 67.9 kW
Number of Cylinders
4
Operating Voltage
24 V
Operating Weight
17,860 lb / 8,101 kg
Power Measured @
2,200 rpm
Rear Axle Oscillation
12 lb / 5 kg
Rear Diff Fluid Capacity
6.40 gal / 24.2 L
Static Tipping Load - Bucket
10,803 lb / 4,900 kg
Static Tipping Load - Forks
14,595 lb / 6,620 kg
Torque Measured @
1,400 rpm
Transmission Fluid Capacity
1.90 gal / 7.2 L
Turning Radius
17.80 ft / 5.43 m
Width
7.60 ft / 2.32 m
Hydraulics
Bucket Capacity - Heaped
2 yd³ / 1.53 m³
Dump Time
1.10 sec
Lower Time
3.30 sec
Net Power
110 hp / 82.0 kW
Pump Flow Capacity
8.40 gal/min / 31.8 L/min
Raise Time
4.40 sec
Relief Valve Setting
3,771 psi / 260.0 bar
Frequently Asked Questions
What is the operating weight of the Michigan L50B? +
The Michigan L50B has an operating weight of 17,860 lb (8,101 kg). This places it in a class suited for integrated tool carrier applications where ground pressure and transport weight are key considerations.
How powerful is the Michigan L50B engine? +
The Michigan L50B produces 96 hp (71.6 kW) of engine power. This output is typical for its weight class and designed to handle demanding Integrated Tool Carrier work cycles efficiently.
How does the Michigan L50B compare to similar Integrated Tool Carrier models? +
You can compare the Michigan L50B side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.