Overview
The Michigan L90 is a integrated tool carrier listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 145 hp, operating weight of 28,540 lb, travel speed of 24.9 mph, fuel capacity of 48.9 gal and hydraulic capacity of 37.0 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Michigan L90 against similar integrated tool carrier models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
28,540
lb
Net Power
150
hp
Gross Power
156
hp
Bucket Capacity - Heaped
3.30
yd3
Full Specifications
55 specs
Dimensions
Breakout Force
26,760 lb / 12,138 kg
Bucket Capacity - Struck
2.80 yd³ / 2.14 m³
Dump Clearance At Max Lift
9.22 ft / 2.81 m
Fork Tine Length
4.02 ft / 1.23 m
Ground Clearance
1.32 ft / 0.40 m
Height At Hook Max Reach
5.16 ft / 1.57 m
Height to Top of Cab
9.95 ft / 3.03 m
Hinge Pin Max Height
12.50 ft / 3.81 m
Hook Height At Max Lift - Extended
23.27 ft / 7.09 m
Hook Height At Max Lift - Standard
20.13 ft / 6.14 m
Hook Reach At Max Lift - Extended
8.93 ft / 2.72 m
Hook Reach At Max Lift - Standard
6.67 ft / 2.03 m
Length W/ Bucket On Ground
23.53 ft / 7.17 m
Length With Out Forks On Ground
23.58 ft / 7.19 m
Max Lift Height
12.06 ft / 3.68 m
Reach At Max Height And Dump
3.45 ft / 1.05 m
Wheelbase
9.85 ft / 3.00 m
Width Over Tires
8.17 ft / 2.49 m
Engine
Alternator Supplied Amperage
55 A
Cooling System Fluid Capacity
14.10 gal / 53.4 L
Displacement
334 cu in / 5.5 L
Engine Make
2244
Engine Model
TD61G
Engine Oil Capacity
4.50 gal / 17.0 L
Front Diff Fluid Capacity
8.60 gal / 32.6 L
Fuel Capacity
48.90 gal / 185.1 L
Gross Power
156 hp / 116.3 kW
Hydraulic System Fluid Capacity
37 gal / 140.1 L
Max Speed Forward
24.90 mph / 40.1 km/h
Max Speed Reverse
18 mph / 29.0 km/h
Max Torque
405 lb-ft / 549 Nm
Net Power
145 hp / 108.1 kW
Number of Cylinders
6
Number of Forward Gears
4
Number of Reverse Gears
3
Operating Voltage
24 V
Operating Weight
28,540 lb / 12,946 kg
Power Measured @
2,200 rpm
Rear Axle Oscillation
30 lb / 14 kg
Rear Diff Fluid Capacity
7.80 gal / 29.5 L
Static Tipping Load - Bucket
21,760 lb / 9,870 kg
Static Tipping Load - Forks
11,023 lb / 5,000 kg
Static Tipping Load - Material Handler
4,850 lb / 2,200 kg
Torque Measured @
1,400 rpm
Transmission Fluid Capacity
8.80 gal / 33.3 L
Transmission Type
Volvo BM HT131
Turning Radius
19.20 ft / 5.85 m
Width
8.70 ft / 2.65 m
Hydraulics
Bucket Capacity - Heaped
3.30 yd³ / 2.52 m³
Dump Time
1.50 sec
Lower Time
2.80 sec
Net Power
150 hp / 111.9 kW
Pump Flow Capacity
53.40 gal/min / 202.1 L/min
Raise Time
6.60 sec
Relief Valve Setting
2,975 psi / 205.1 bar
Frequently Asked Questions
What is the operating weight of the Michigan L90? +
The Michigan L90 has an operating weight of 28,540 lb (12,946 kg). This places it in a class suited for integrated tool carrier applications where ground pressure and transport weight are key considerations.
How powerful is the Michigan L90 engine? +
The Michigan L90 produces 156 hp (116.3 kW) of engine power. This output is typical for its weight class and designed to handle demanding Integrated Tool Carrier work cycles efficiently.
How does the Michigan L90 compare to similar Integrated Tool Carrier models? +
You can compare the Michigan L90 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.