Overview
The Michigan L90-I is a integrated tool carrier listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 145 hp, operating weight of 27,668 lb, travel speed of 20.4 mph, fuel capacity of 52.9 gal and hydraulic capacity of 51.0 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Michigan L90-I against similar integrated tool carrier models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
27,668.10
lb
Gross Power
145
hp
Bucket Capacity - Heaped
2.80
yd3
Full Specifications
53 specs
Dimensions
Breakout Force
26,380 lb / 11,966 kg
Bucket Capacity - Struck
2.30 yd³ / 1.76 m³
Dump Clearance At Max Lift
9.22 ft / 2.81 m
Fork Tine Length
4.02 ft / 1.23 m
Ground Clearance
1.32 ft / 0.40 m
Height At Hook Max Reach
5.27 ft / 1.61 m
Height to Top of Cab
10.01 ft / 3.05 m
Hinge Pin Max Height
12.59 ft / 3.84 m
Hook Height At Max Lift - Extended
23.28 ft / 7.10 m
Hook Height At Max Lift - Standard
20.17 ft / 6.15 m
Hook Max Reach - Extended
17.90 ft / 5.46 m
Hook Max Reach - Standard
10.80 ft / 3.29 m
Hook Reach At Max Lift - Extended
9.06 ft / 2.76 m
Hook Reach At Max Lift - Standard
7.04 ft / 2.15 m
Length W/ Bucket On Ground
23.56 ft / 7.18 m
Max Lift Height
12.06 ft / 3.68 m
Reach At Max Height And Dump
3.45 ft / 1.05 m
Wheelbase
9.85 ft / 3.00 m
Width Over Tires
8.29 ft / 2.53 m
Engine
Alternator Supplied Amperage
45 A
Cooling System Fluid Capacity
10.10 gal / 38.2 L
Displacement
359 cu in / 5.9 L
Engine Make
2347
Engine Model
6 BT 5.9
Engine Oil Capacity
4 gal / 15.1 L
Front Diff Fluid Capacity
7.30 gal / 27.6 L
Fuel Capacity
52.90 gal / 200.2 L
Gross Power
145 hp / 108.1 kW
Hydraulic System Fluid Capacity
51 gal / 193.1 L
Max Speed Forward
20.40 mph / 32.8 km/h
Max Speed Reverse
20.40 mph / 32.8 km/h
Max Torque
410 lb-ft / 556 Nm
Number of Cylinders
6
Number of Forward Gears
4
Number of Reverse Gears
4
Operating Voltage
24 V
Operating Weight
27,668 lb / 12,550 kg
Power Measured @
2,200 rpm
Rear Axle Oscillation
30 lb / 14 kg
Rear Diff Fluid Capacity
7.30 gal / 27.6 L
Static Tipping Load - Bucket
20,481 lb / 9,290 kg
Static Tipping Load - Forks
11,023 lb / 5,000 kg
Tire Size
20.50 in / 521 mm
Torque Measured @
1,500 rpm
Transmission Fluid Capacity
9.30 gal / 35.2 L
Transmission Type
Clark C270 powershift
Turning Radius
19.40 ft / 5.91 m
Width
8.70 ft / 2.65 m
Hydraulics
Bucket Capacity - Heaped
2.80 yd³ / 2.14 m³
Dump Time
1.50 sec
Lower Time
3.50 sec
Raise Time
6.40 sec
Relief Valve Setting
2,970 psi / 204.8 bar
Frequently Asked Questions
What is the operating weight of the Michigan L90-I? +
The Michigan L90-I has an operating weight of 27,668 lb (12,550 kg). This places it in a class suited for integrated tool carrier applications where ground pressure and transport weight are key considerations.
How powerful is the Michigan L90-I engine? +
The Michigan L90-I produces 145 hp (108.1 kW) of engine power. This output is typical for its weight class and designed to handle demanding Integrated Tool Carrier work cycles efficiently.
How does the Michigan L90-I compare to similar Integrated Tool Carrier models? +
You can compare the Michigan L90-I side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.