Attachment selection

Check the requirements before choosing the tool

Compare a loader's hydraulic package with a cold planer's published requirements, then record the remaining fit checks.

Carrier & attachment

Loader Installed hydraulic package

Optional equipment must be fitted to the actual machine. A model's available options are not proof of installation.

Attachment

Use documented values for this machine

Override only with documented working values for the installed package. Do not alter relief settings to match an attachment.

Available / selected flow · US gpmDocumented pressure · psi

Loader manufacturer reference ↗

Attachment manufacturer reference ↗

References reviewed 2026-10-28.

Specification comparison

Requirement screen

Check	Carrier reference / entered value	Attachment preferred range
Auxiliary flow	US gpm	– US gpm
Pressure	psi	– psi

Flow screen
Pressure screen
Attachment reference weight: lb
Working width: in

An overlapping flow range does not establish compatibility. Listed carrier pressure may be a relief or package specification, not the attachment's working pressure. Preferred attachment ranges are not universal hard limits.

Remaining checks

not recorded

Mark only items supported by the attachment manual or written dealer/manufacturer confirmation. These are your record of checks, not an approval issued by this site.

Mechanical mount and coupler match Return connection and allowed backpressure Case-drain requirement and approved routing Electrical harness and control functions Application guarding and operator protection Attachment weight, load geometry and machine limits Exact carrier, serial range and attachment approved together

Checks recorded. Keep the supporting documents with your equipment record.

Reference coverage

This first set covers four compact track loaders and three cold planer references. Cross-brand combinations are not presented as manufacturer-approved matches. If a machine or attachment is missing, use its actual manufacturer documentation; no specification is guessed from a similar model.

View source data

Loader	Package	US gpm	psi	Source
Bobcat T76-2	Standard flow	23.3	3500	Manufacturer
Bobcat T76-2	Optional high flow	30.3	3500	Manufacturer
Kubota SVL75-3	Standard flow	19.2	3185	Manufacturer
Kubota SVL75-3	Optional high flow	29.8	3185	Manufacturer
Cat 299D3 (not XE)	Standard flow	23	3335	Manufacturer
Cat 299D3 (not XE)	High Flow XPS	32	4061	Manufacturer
John Deere 333 P-Tier	Standard flow	25	3500	Manufacturer
John Deere 333 P-Tier	Optional high flow	44	3500	Manufacturer

Attachment	US gpm	psi	Source
Cat PC104 cold planer	16–22	3050–3300	Manufacturer
Cat PC305 cold planer	26–33	3300–4000	Manufacturer
Cat PC306 cold planer	26–33	3300–4000	Manufacturer

For selection context, read standard flow vs high flow, cold planer width and pass count, or return to your machine notebook.