Overview
The Caterpillar 242 is a skid steer loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 57.7 hp, operating weight of 6,859 lb, capacity of 0.6 yd³, travel speed of 6.9 mph, fuel capacity of 17.2 gal and hydraulic capacity of 14.6 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Caterpillar 242 against similar skid steer loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
6,858.50
lb
Net Power
57.70
hp
Gross Power
58
hp
Bucket Capacity
0.60
yd3
Full Specifications
56 specs
Dimensions
Bucket Pin Height - Carry Position
11.80 ft / 3.60 m
Bucket Pin Height - Maximum Lift
10 ft / 3.05 m
Bumper Overhang - Rear Axle
39 lb / 18 kg
Clearance At Max Lift And Dump
7.47 ft / 2.28 m
Clearance At Maximum Lift And Dump
88.20 ft / 26.88 m
Ground Clearance
7 ft / 2.13 m
Height - Top Of Cab
6.52 ft / 1.99 m
Height to Top of Cab
6.52 ft / 1.99 m
Length - With Bucket On Ground
135.31 in / 3,437 mm
Length - Without Bucket
109.30 in / 2,776 mm
Length W/O Bucket
9.11 ft / 2.78 m
Length With Bucket
11.28 ft / 3.44 m
Maximum Overall Height
154.60 in / 3,927 mm
Reach - Maximum Lift/Dump
29.90 ft / 9.11 m
Reach At Max Lift And Dump
30.16 ft / 9.19 m
Turning Radius From Center - Inc Bucket
88.71 ft / 27.04 m
Vehicle Width Over Tires
66 in / 1,676 mm
Wheel Base
3.59 in / 91 mm
Wheelbase
3.73 ft / 1.14 m
Width Over Tires
5.01 ft / 1.53 m
Engine
Bore
3.90 in / 99 mm
Bucket Capacity
0.60 yd³ / 0.46 m³
Displacement
183 cu in / 3.0 L
Engine Make
2236
Engine Model
3034
Fuel Capacity
17.20 gal / 65.1 L
Fuel Tank
18.20 gal / 68.9 L
Gross Power
58 hp / 43.3 kW
Hydraulic System Fluid Capacity
14.60 gal / 55.3 L
Hydraulic Tank
9.20 gal / 34.8 L
Max Speed
6.90 mph / 11.1 km/h
Net Flywheel Power
54 hp / 40.3 kW
Net Power
54 hp / 40.3 kW
Number of Cylinders
4
Operating Load Rating
2,000 lb / 907 kg
Operating Speed
6.90 mph / 11.1 km/h
Operating Weight
6,859 lb / 3,111 kg
Operational Weight
6,931 lb / 3,144 kg
Power Measured @
2,600 rpm
Stroke
4 in / 102 mm
Tipping Angle
3,770 deg
Hydraulics
Chain Box - Each Side
1.60
Fops
SAEJ/ISO 3449 APR98 Level I and ISO3449:1992 Level I
Fops Level Ii
SAEJ/ISO 3449 APR 98 Level II and ISO 3449:1992 Level II (optional)
Loader Hydraulic Flow
15.10 gal/min / 57.2 L/min
Loader Hydraulic Pressure
3,300 psi / 227.5 bar
Net Power
58 hp / 43.0 kW
Pump Flow Capacity
15.20 gal/min / 57.5 L/min
Rops
SAE J1040 MAY94 and ISO3471:1994
Other
Breakout Force - Lift Cylinder
3,814 lb / 1,730 kg
Breakout Force - Tilt Cylinder
4,056 lb / 1,840 kg
Rated Operating Capacity
2,000 lb / 907 kg
Rated Operating Capacity With Optional Counterweight
2,047 lb / 929 kg
Tipping Load
4,000 lb / 1,814 kg
Cooling System
24 gal / 90.8 L
Engine Crankcase
2.10 gal / 7.9 L
Related Machines
Related Guides & Articles
Frequently Asked Questions
What is the operating weight of the Caterpillar 242? +
The Caterpillar 242 has an operating weight of 6,859 lb (3,111 kg). This places it in a class suited for skid steer loader applications where ground pressure and transport weight are key considerations.
How powerful is the Caterpillar 242 engine? +
The Caterpillar 242 produces 58 hp (43.3 kW) of engine power. This output is typical for its weight class and designed to handle demanding Skid Steer Loader work cycles efficiently.
How does the Caterpillar 242 compare to similar Skid Steer Loader models? +
You can compare the Caterpillar 242 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.